Szkicownik: Przełącz tryb konstrukcji

From FreeCAD Documentation
Revision as of 16:37, 17 April 2024 by Kaktus (talk | contribs) (Created page with "===Przełączanie narzędzi===")

Szkicownik: Przełącz geometrię konstrukcji

Lokalizacja w menu
Szkic → Elementy geometryczne szkicownika → Przełącz tryb konstrukcji
Środowisko pracy
Szkicownik
Domyślny skrót
G N
Wprowadzono w wersji
-
Zobacz także
brak

Opis

Narzędzie Przełącz tryb konstrukcji albo przełącza narzędzia tworzenia geometrii do / z trybu konstrukcyjnego, albo przełącza wybraną geometrię do / z geometrii konstrukcyjnej.

Geometria konstrukcyjna jest ważnym narzędziem szkicownika. Gdy szkic jest używany do operacji 3D, geometria konstrukcyjna jest ignorowana.

Geometria konstrukcji jest oznaczona specjalnym kolorem (domyślnie niebieskim) i (dostępne w wersji 0.22) typem linii. Geometria konstrukcyjna nie jest widoczna poza szkicem, a jej zadaniem jest pomoc w definiowaniu wiązań i innej geometrii wewnątrz samego szkicu. Linie konstrukcyjne mogą być jednak używane jako oś obrotu przez Wyciągnij przez obrót.

Użycie

Przełączanie narzędzi

  1. Make sure there is no selection.
  2. There are several ways to invoke the tool:
    • Press the Toggle construction geometry button.
    • Select the Sketcher → Sketcher geometries → Toggle construction geometry option from the menu.
    • Right-click in the 3D view and select the Toggle construction geometry option from the context menu.
    • Use the keyboard shortcut: G then N.
  3. The mode of the geometry creation tools is toggled:
    • In normal mode their menu and toolbar icons are white, and they create regular geometry (default color white). The icon of this tool is then: .
    • In construction mode their menu and toolbar icons are blue, and they create construction geometry (default color blue). The icon of this tool is then: .

Toggle geometry

  1. Select one or more elements in the sketch.
  2. Invoke the tool as described above, or with the following additional option:
    • Right-click in the Elements section of the Task panel and select the Toggle construction geometry option from the context menu.
  3. The selected elements are changed from normal geometry to construction geometry or vice versa. Their appearance changes accordingly.
  4. The mode of the geometry creation tools is not changed.