Szkicownik: Krzywa złożona przez punkty kontrolne

From FreeCAD Documentation
Revision as of 11:11, 18 March 2023 by Kaktus (talk | contribs) (Created page with "==Ograniczenia==")

Szkicownik: Utwórz krzywą złożoną

Lokalizacja w menu
Szkic → Elementy geometryczne szkicownika → Utwórz krzywą złożoną
Środowisko pracy
Szkicownik
Domyślny skrót
G B B
Wprowadzono w wersji
0.17
Zobacz także
Utwórz okresową krzywą złożoną

Opis

To narzędzie tworzy krzywą złożoną z jej punktów kontrolnych. (Zapoznaj się z treścią strony Krzywe złożone, aby uzyskać więcej informacji o krzywych typu B-splines).

Krzywa złożona (w kolorze białym) zdefiniowana przez 4 punkty kontrolne. Na rysunku widać zielony wielokąt kontrolny (linie proste łączące punkty kontrolne) oraz koła wagowe w kolorze ciemnożółtym. Zielona cyfra "3" w środku odnosi się do stopnia krzywej złożonej, a cyfry "(4)" na końcach krzywej złożonej odnoszą się do ich krotności węzła. Czerwona cyfra "3" oznacza wagę punktu kontrolnego, która jest zdefiniowana jako ograniczenie promienia do okręgu punktu kontrolnego.

Użycie

  1. Press the Create B-spline button.
  2. Create a series of points by clicking in the 3D view. While the command is active, the created points are connected with straight lines, and a construction circle is created centered on each point.
  3. Optionally press D before terminating the input to define the degree of the B-spline. introduced in version 0.20
  4. Optionally press Backspace before terminating the input to delete the last created control point. introduced in version 0.20
  5. Right-click to terminate the input and generate the curve.
  6. Depending on preferences, the tool may remain active to trace a new curve. Right-click again to exit the command.
  • It is possible to define the weight of the control points by changing the radii of the weight circles. The equality constraints on the circles need to be deleted first. The radius constraint is arbitrary, the weight of the control points will be defined by the relative radii of the circles. It works similar to gravity: the bigger a circle is in relation to the others, the more the curve will be attracted to the control point.
  • The visibility of the control polygon, the curvature comb, the degree and the knot multiplicity can be toggled on/off from the B-spline tools toolbar.
  • Check out the other tools in the B-spline tools toolbar for more B-spline editing tools.

Ograniczenia

  • Many types of constraints are not supported at this time. Only the B-spline's control point and end points can be constrained.
  • Split and extend tools are not supported.
  • The shape of a B-spline curve can only be edited by dragging one of the control points. The knots lying on the curve cannot be selected.