Std TreeSyncView/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/pl |Name=Std TreeSyncView |Name/pl=Std: Synchronizuj widok |MenuLocation=Widok → Akcje widoku drzewa → Synchronizuj widok |Workbenches=wszystkie |Shortcut={{K...")
(Created page with "==Opis==")
Line 19: Line 19:
}}
}}


==Description==
==Opis==


The '''Std TreeSyncView''' command toggles the [[Tree_view|Tree view]] SyncView mode. If this mode is on, selecting an object from a different document in the Tree view automatically activates that document’s last used docked [[3D_view|3D view]].
The '''Std TreeSyncView''' command toggles the [[Tree_view|Tree view]] SyncView mode. If this mode is on, selecting an object from a different document in the Tree view automatically activates that document’s last used docked [[3D_view|3D view]].

Revision as of 18:57, 30 August 2022

Std: Synchronizuj widok

Lokalizacja w menu
Widok → Akcje widoku drzewa → Synchronizuj widok
Środowisko pracy
wszystkie
Domyślny skrót
T 1
Wprowadzono w wersji
0.19
Zobacz także
brak

Opis

The Std TreeSyncView command toggles the Tree view SyncView mode. If this mode is on, selecting an object from a different document in the Tree view automatically activates that document’s last used docked 3D view.

Usage

  1. There are several ways to invoke the command:
    • Click on the black down arrow to the right of the button and select the Sync view option from the flyout. Note: the button image will change depending on the selected option.
    • Select the View → TreeView actions → Sync view option from the menu.
    • Use the keyboard shortcut: T then 1.

Preferences

The Tree view SyncView mode can also be set in the Preferences editor: Edit→ Preferences → General → Selection.