Std: Importuj

From FreeCAD Documentation
Revision as of 12:22, 28 May 2023 by Kaktus (talk | contribs) (Created page with "==Płaszczyzna obrazu==")

Std: Importuj

Lokalizacja w menu
Plik → Importuj ...
Środowisko pracy
wszystkie
Domyślny skrót
Ctrl + I
Wprowadzono w wersji
-
Zobacz także
Otwórz, Import Export, Ustawienia Importu i Eksportu

Opis

Polecenie Importuj importuje geometrię z innego formatu pliku do aktywnego dokumentu. Obsługiwanych jest wiele formatów plików, a dla niektórych formatów istnieje wiele opcji importu. Zobacz stronę Import eksport, aby uzyskać więcej informacji.

introduced in version 0.21: If an image format is selected the command will create an Image Plane.

Użycie

  1. Istnieje kilka sposobów na wywołanie tego polecenia:
    • Wybierz z menu opcję Plik → Importuj ....
    • Użyj skrótu klawiaturowego: Ctrl + I.
  2. Opcjonalnie wybierz odpowiedni format pliku w oknie dialogowym.
  3. Wybierz plik.
  4. Naciśnij przycisk Otwórz.

Opcje

  • Naciśnij przycisk Esc lub przycisk Anuluj aby przerwać wykonywanie polecenia.

Uwagi

Ustawienia

  • Zobacz stronę: Ustawienia Importu i Eksportu.
  • Zapamiętana jest ostatnio używana lokalizacja pliku: Przybory → Edycja parametrów ... → BaseApp → Preferences → General → FileOpenSavePath.
  • Zapamiętany jest ostatni używany filtr eksportu: Przybory → Edycja parametrów ... → BaseApp → Preferences → General → FileExportFilter.

Płaszczyzna obrazu

An Image Plane is a planar representation of an image in the 3D view. It can for example be used when creating a model based on photographs of an existing object.

By default an Image Plane is placed on the global XY plane. The initial size of an Image Plane is calculated using a 96 px/inch resolution for BMP images. Image Planes based on SVG images have a default size of 100 mm x 100 mm, an SVG's aspect ratio is ignored.

Edit

  1. To edit an Image Plane do one of the following:
    • Double-click the Image Plane in the Tree view.
    • Right-click the Image Plane in the Tree view and select Change image... from the context menu.
  2. A task panel opens.
  3. Choose orientation options:
    • Select the XY, XZ or YZ plane of the global coordinate system.
    • Check Reverse direction to rotate the Image Plane 180 ° around its DANEPlacement DANEAxis.
    • Optionally change the Offset. A small negative offset can be useful when tracing the image with a sketch or Draft geometry.
  4. Scale image options:
    • Scale by numerical input:
      1. Optionally uncheck Keep aspect ratio for unequal scaling.
      2. Enter a Width and/or Height.
    • Scale by picking points:
      1. Optionally check Allow points outside the image.
      2. Press the Interactive button.
      3. Pick two points.
      4. Enter the Desired distance.
      5. Press the Accept button.
  5. Press the OK button to confirm the changes and close the task panel.

Properties

See also: Property editor.

An Image Plane object is derived from an App GeoFeature object and inherits all its properties. It also has the following additional properties:

Data

Image Plane

  • DANEImage File (FileIncluded): The image file used for the Image Plane. This file is stored in the .FCStd file.
  • DANEXSize (Length): The width of the Image Plane.
  • DANEYSize (Length): The height of the Image Plane.

View

Object Style

  • WIDOKLighting (Enumeration): How the Image Plane is illuminated in the 3D view. Can be Two side or One side.