Std: Synchronizuj widok drzewa

From FreeCAD Documentation
Revision as of 18:59, 30 August 2022 by Kaktus (talk | contribs) (Created page with "Tryb Synchronizacja widoku drzewa można również ustawić w Edytorze preferencji: {{MenuCommand|Edycja → Preferencje ... → Ogólne...")

Std: Synchronizuj widok

Lokalizacja w menu
Widok → Akcje widoku drzewa → Synchronizuj widok
Środowisko pracy
wszystkie
Domyślny skrót
T 1
Wprowadzono w wersji
0.19
Zobacz także
brak

Opis

The Std TreeSyncView command toggles the Tree view SyncView mode. If this mode is on, selecting an object from a different document in the Tree view automatically activates that document’s last used docked 3D view.

Usage

  1. There are several ways to invoke the command:
    • Click on the black down arrow to the right of the button and select the Sync view option from the flyout. Note: the button image will change depending on the selected option.
    • Select the View → TreeView actions → Sync view option from the menu.
    • Use the keyboard shortcut: T then 1.

Ustawienia

Tryb Synchronizacja widoku drzewa można również ustawić w Edytorze preferencji: Edycja → Preferencje ... → Ogólne → Zaznaczanie.