Sketcher SelectElementsWithDoFs/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/pl |Przełącz aktywność wiązania |Zamknij kształt |środowisko pracy Szkicownik |IconL=Sketcher_ToggleActiveConstraint.svg |IconR=Sketcher_CloseShape.svg‎ |IconC=Workbench_Sketcher.svg }}")
(Created page with "==Opis==")
Line 11: Line 11:
}}
}}


{{GuiCommand
{{GuiCommand/pl
|Name=Sketcher SelectElementsWithDoFs
|Name=Sketcher SelectElementsWithDoFs
|Name/pl=Szkicownik: SelectElementsWithDoFs
|MenuLocation=SketchSketcher tools → Select unconstrained DoF
|MenuLocation=SzkicNarzędzia szkicownika → Select unconstrained DoF
|Workbenches=[[Sketcher_Workbench|Sketcher]]
|Workbenches=[[Sketcher_Workbench/pl|Szkicownik]]
|Shortcut={{KEY|Z}} {{KEY|F}}
|Shortcut={{KEY|Z}} {{KEY|F}}
|Version=0.18
|Version=0.18
}}
}}


==Description==
<span id="Description"></span>
==Opis==


This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).
This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

Revision as of 13:37, 10 April 2023

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Szkicownik: SelectElementsWithDoFs

Lokalizacja w menu
Szkic → Narzędzia szkicownika → Select unconstrained DoF
Środowisko pracy
Szkicownik
Domyślny skrót
Z F
Wprowadzono w wersji
0.18
Zobacz także
brak

Opis

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

Usage

In the Solver messages box located at the top of the Tasks tab, the following message(s) should be displayed:

  • In case of an under-constrainend sketch:

Under-constrained sketch with X degrees of freedom

where "X" is the number of degrees of freedom remaining in the sketch; you will receive more information if you click on the blue link, or if you use the menu.

  1. The elements which have degrees of freedom are now highlighted in green.
  2. Click anywhere in the sketch to clear the highlight color.
  • In case of a fully-constrainend sketch:

Fully constrained sketch