Sketcher SelectElementsWithDoFs/pl: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "{{Docnav/pl |Przełącz aktywność wiązania |Zamknij kształt |środowisko pracy Szkicownik |IconL=Sketcher_ToggleActiveConstraint.svg |IconR=Sketcher_CloseShape.svg‎ |IconC=Workbench_Sketcher.svg }}")
Line 2: Line 2:
{{UnfinishedDocu{{#translation:}}}} <!-- missing details instructions around clicking the blue DOF link -->
{{UnfinishedDocu{{#translation:}}}} <!-- missing details instructions around clicking the blue DOF link -->


{{Docnav
{{Docnav/pl
|[[Sketcher_ToggleActiveConstraint|Activate/deactivate constraint]]
|[[Sketcher_ToggleActiveConstraint/pl|Przełącz aktywność wiązania]]
|[[Sketcher_CloseShape|Close shape]]
|[[Sketcher_CloseShape/pl|Zamknij kształt]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench/pl|środowisko pracy Szkicownik]]
|IconL=Sketcher_ToggleActiveConstraint.svg
|IconL=Sketcher_ToggleActiveConstraint.svg
|IconR=Sketcher_CloseShape.svg‎
|IconR=Sketcher_CloseShape.svg‎

Revision as of 13:32, 10 April 2023

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Sketcher SelectElementsWithDoFs

Menu location
Sketch → Sketcher tools → Select unconstrained DoF
Workbenches
Sketcher
Default shortcut
Z F
Introduced in version
0.18
See also
None

Description

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

Usage

In the Solver messages box located at the top of the Tasks tab, the following message(s) should be displayed:

  • In case of an under-constrainend sketch:

Under-constrained sketch with X degrees of freedom

where "X" is the number of degrees of freedom remaining in the sketch; you will receive more information if you click on the blue link, or if you use the menu.

  1. The elements which have degrees of freedom are now highlighted in green.
  2. Click anywhere in the sketch to clear the highlight color.
  • In case of a fully-constrainend sketch:

Fully constrained sketch