Szkicownik: Przedłuż krawędź

From FreeCAD Documentation
Revision as of 11:38, 27 March 2023 by Kaktus (talk | contribs) (Created page with "Narzędzie '''Przedłuż krawędź''' przedłuża krawędź do dowolnego miejsca w szkicu lub do docelowej krawędzi lub obiektu punktu.")

Szkicownik: Rozszerz krawędź

Lokalizacja w menu
SSzkic → Elementy geometryczne szkicownika → Rozszerz krawędź
Środowisko pracy
Szkicownik
Domyślny skrót
G Q
Wprowadzono w wersji
0.17
Zobacz także
Przytnij krawędź

Opis

Narzędzie Przedłuż krawędź przedłuża krawędź do dowolnego miejsca w szkicu lub do docelowej krawędzi lub obiektu punktu.

Shown on the left (1), the two sketch elements before the operation; in the middle (2), the line is being extended to the arc; to the right (3), the final result.

Usage

  1. Press the Extend edge button.
  2. Select a line or an arc.
  3. In the 3D view, move the mouse pointer toward the direction to extend.
  4. Click on an arbitrary location in space, or
  5. To extend to another edge, place the mouse pointer over the target edge; when it is highlighted and the Point on object constraint icon appears besides the mouse pointer, click to confirm. A point on object constraint will be added.
  6. To extend to a point in the sketch, place the mouse pointer over the target point; when it is highlighted and the Coincident constraint icon appears besides the mouse pointer, click to confirm. A coincident constraint will be added.

Notes

  • Only arcs and lines can be extended at this time.
  • The target edge or point object may be modified as well if it is not fully constrained.