Sketcher CreatePoint/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Użycie==")
(Created page with "* Kliknij na przycisk {{Button|24px Utwórz punkt}}, aby aktywować funkcję. * Kliknięcie w szkicu tworzy punkt. * Naciśnięcie klawisza...")
Line 24: Line 24:
==Użycie==
==Użycie==


* Click on the button {{KEY|[[Image:Sketcher_CreatePoint.svg|24px]] Create point}}, to activate the function.
* Kliknij na przycisk {{Button|[[Image:Sketcher_CreatePoint.svg|24px]] Utwórz punkt}}, aby aktywować funkcję.
* Kliknięcie w szkicu tworzy punkt.
* Clicking in the sketch creates a point.
* Pressing {{KEY|Esc}} or clicking the right mouse button cancels the function.
* Naciśnięcie klawisza {{KEY|Esc}} lub kliknięcie prawym przyciskiem myszy anuluje funkcję.


==Options==
==Options==

Revision as of 14:19, 5 April 2021

Sketcher: Utwórz punkt

Lokalizacja w menu
Szkicownik → Elementy geometryczne szkicownika → Utwórz punkt
Środowisko pracy
Szkicownik
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
brak

Opis

Narzędzie Punkt tworzy punkt w bieżącym szkicu, który może być użyty do konstruowania elementów geometrii. Punkt jest zawsze elementem konstrukcyjnym i nie jest widoczny w oknie widoku 3D.

Point in the sketcher

Użycie

  • Kliknij na przycisk Utwórz punkt, aby aktywować funkcję.
  • Kliknięcie w szkicu tworzy punkt.
  • Naciśnięcie klawisza Esc lub kliknięcie prawym przyciskiem myszy anuluje funkcję.

Options

A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

Limitations

The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the PartDesign Point for a datum point or the Part Point instead.