Std Measure/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Polecenie '''Pomiary''' daje dostęp do ujednoliconej funkcjonalności pomiarowej wprowadzonej we FreeCAD 1.0 w ramach projektu GSoC 2023. Zastąpiło ono stare narzędzia do mierzenia, zapewniając wielofunkcyjne narzędzie pomiarowe.")
(Created page with "==Użycie==")
Line 24: Line 24:
Polecenie '''Pomiary''' daje dostęp do ujednoliconej funkcjonalności pomiarowej wprowadzonej we FreeCAD 1.0 w ramach [[Unified_Measurement_Facility/pl|projektu GSoC 2023]]. Zastąpiło ono [[Part_Workbench/pl#Pomiary|stare narzędzia do mierzenia]], zapewniając wielofunkcyjne narzędzie pomiarowe.
Polecenie '''Pomiary''' daje dostęp do ujednoliconej funkcjonalności pomiarowej wprowadzonej we FreeCAD 1.0 w ramach [[Unified_Measurement_Facility/pl|projektu GSoC 2023]]. Zastąpiło ono [[Part_Workbench/pl#Pomiary|stare narzędzia do mierzenia]], zapewniając wielofunkcyjne narzędzie pomiarowe.


<span id="Usage"></span>
<div lang="en" dir="ltr" class="mw-content-ltr">
==Usage==
==Użycie==
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
<div lang="en" dir="ltr" class="mw-content-ltr">

Revision as of 13:41, 13 June 2024

Std: Pomiary

Lokalizacja w menu
Przybory → Pomiary
Środowisko pracy
wszystkie
Domyślny skrót
brak
Wprowadzono w wersji
1.0
Zobacz także
Pomiar odległości, Wymiarowanie

Opis

Polecenie Pomiary daje dostęp do ujednoliconej funkcjonalności pomiarowej wprowadzonej we FreeCAD 1.0 w ramach projektu GSoC 2023. Zastąpiło ono stare narzędzia do mierzenia, zapewniając wielofunkcyjne narzędzie pomiarowe.

Użycie

  1. Optionally, preselect the geometrical entities to be used for measurement.
  2. Press the Std Measure button or select the Tools → Measure option from the menu.
  3. If no geometrical entities were preselected, do one of the following:
    • Select the geometrical entities while leaving the Mode as Auto so that the mode will be automatically determined based on the selection.
    • Choose the Mode other than Auto and then select the geometrical entities (clicking on them again will deselect them):
      • Distance - the shortest distance between the selected entities,
      • Angle - angle between the selected entities,
      • Length - length of the selected edge,
      • Position - coordinates of the selected vertex,
      • Area - area of the selected face,
      • Radius - radius of the selected circular edge,
      • Center of Mass - COM of the selected edge, face or solid (only if preselected in the tree).
  4. The measurement result will be shown in the Result field and on a label displayed in the 3D view. That label will also include an icon indicating the type of measurement. The labels can be customized in Preferences. They can be moved in the 3D view by dragging them with a cursor.
  5. Click Reset to delete the measurement or Save to keep it (saved measurements will be kept in Measurements container in the tree view). Click Close to exit the tool.