Std ViewFitSelection/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opis==")
(Created page with "==Użycie==")
Line 23: Line 23:
The '''Std ViewFitSelection''' command zooms and pans the camera so that all selected objects fit inside the active [[3D_view|3D view]].
The '''Std ViewFitSelection''' command zooms and pans the camera so that all selected objects fit inside the active [[3D_view|3D view]].


==Usage==
==Użycie==


# Select one or more objects.
# Select one or more objects.

Revision as of 07:04, 17 October 2021

Std: Dopasuj wybór do widoku

Lokalizacja w menu
Widok → Widoki standardowe → Dopasuj wybór
Środowisko pracy
wszystkie
Domyślny skrót
V S
Wprowadzono w wersji
-
Zobacz także
Dopasuj wszystko

Opis

The Std ViewFitSelection command zooms and pans the camera so that all selected objects fit inside the active 3D view.

Użycie

  1. Select one or more objects.
  2. There are several ways to invoke the command:
    • Press the Std ViewFitSelection button.
    • Select the View → Standard views → Fit selection option from the menu.
    • Select the Fit selection option from the 3D view context menu.
    • Use the keyboard shortcut: V then S.


Scripting

See also: FreeCAD Scripting Basics.

To change the view to 'fit selection' the SendMsgToActiveView method of the FreeCADGui object can be used. This method is not available if FreeCAD is in console mode.

import FreeCADGui

FreeCADGui.SendMsgToActiveView('ViewSelection')