Sketcher ToggleDrivingConstraint/pl: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 51: Line 51:
# Invoke the tool as described above, or with one of the following additional options:
# Invoke the tool as described above, or with one of the following additional options:
#* {{Version|0.22}}: Right-click in the [[3D_view|3D view]] and select the {{MenuCommand|[[Image:Sketcher_ToggleDrivingConstraint.svg|16px]] Toggle driving/reference constraint}} option from the context menu.
#* {{Version|0.22}}: Right-click in the [[3D_view|3D view]] and select the {{MenuCommand|[[Image:Sketcher_ToggleDrivingConstraint.svg|16px]] Toggle driving/reference constraint}} option from the context menu.
#* Right-click in the {{MenuCommand|Constraints}} section of the [[Sketcher_Dialog|Sketcher Dialog]] and select the {{MenuCommand|Toggle to/from reference}} option from the context menu.
#* Right-click in the '''Constraints''' section of the [[Sketcher_Dialog|Sketcher Dialog]] and select the {{MenuCommand|Toggle to/from reference}} option from the context menu.
# The selected constraints are changed from driving to reference mode or vice versa. Their appearance changes accordingly.
# The selected constraints are changed from driving to reference mode or vice versa. Their appearance changes accordingly.
# The mode of the dimensional constraint creation tools is not changed.
# The mode of the dimensional constraint creation tools is not changed.

Revision as of 08:19, 19 April 2024

Szkicownik: Przełącz kontrolę wiązania

Lokalizacja w menu
Szkic → Wiązania szkicownika → Przełącz kontrolę wiązania
Środowisko pracy
Szkicownik
Domyślny skrót
K X
Wprowadzono w wersji
0.16
Zobacz także
Przełącz tryb konstrukcji

Opis

Narzędzie Przełącz kontrolę wiązania zmienia więzy wymiarowe (blokady odległości, odległości pionowej / poziomej, Długości, Promienia i Kąta) w tryb referencyjny i z powrotem. Ikony na pasku narzędzi zmieniają kolor na niebieski i zamiast ograniczeń wymiarowych tworzone są wymiary informacyjne. Wymiary te nie wiążą szkicu. Tworzenie wymiarów referencyjnych w szkicu może być użyteczne jako sposób sprawdzania wymiarów. Po nadaniu im nazwy mogą być również używane do tworzenia więzów w innym szkicu poprzez wyrażenia.

Contrary to driving constraints, reference constraints do not constrain the sketch, their value depends on other constraints, they are driven. They can be useful to verify measurements. They can be used in expressions, but not in the sketch itself.

W celu zdefiniowania profilu ustawiono poziome wiązanie odległości (50 mm), wiązanie pionowe (30 mm) oraz wiązanie kąta (75°); na odcinku linii ukośnej dodano wymiar odniesienia, aby poznać jego długość (31,0583 mm).

Użycie

Toggle tools

  1. Naciśnij przycisk Przełącz kontrolę wiązania. Ikony wiązań wymiarowych na pasku narzędzi Wiązania szkicownika zmieniają kolor z czerwonego na niebieski.
  2. Zwykła metoda tworzenia wiązań wymiarowych działa tak samo, ale zamiast tego dodawany jest niebieski wymiar porównawczy.
  3. Aby przywrócić pasek narzędzi Wiązania szkicownik do trybu konstrukcyjnego (czerwony), naciśnij ponownie przycisk Przełącz kontrolę wiązania.
  4. Aby przekształcić wiązanie wymiarowe w wymiar informacyjny lub odwrotnie, wybierz je i naciśnij przycisk Przełącz kontrolę wiązania.

Toggle constraints

  1. Select one or more dimensional constraints.
  2. Invoke the tool as described above, or with one of the following additional options:
    • introduced in version 0.22: Right-click in the 3D view and select the Toggle driving/reference constraint option from the context menu.
    • Right-click in the Constraints section of the Sketcher Dialog and select the Toggle to/from reference option from the context menu.
  3. The selected constraints are changed from driving to reference mode or vice versa. Their appearance changes accordingly.
  4. The mode of the dimensional constraint creation tools is not changed.