Std: Wyrównanie

From FreeCAD Documentation
Revision as of 15:43, 17 May 2022 by Kaktus (talk | contribs) (Created page with "Polecenie '''Wyrównanie''' wyrównuje obiekt względem stałego obiektu odniesienia, używając jednej lub więcej par punktów.")

Std: Wyrównanie

Lokalizacja w menu
Edycja → Wyrównanie ...
Środowisko pracy
wszystkie
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Umiejscowienie

Opis

Polecenie Wyrównanie wyrównuje obiekt względem stałego obiektu odniesienia, używając jednej lub więcej par punktów.

The command interface after two point pairs have been defined

Usage

  1. Select the reference object. This will be the fixed object and not be changed.
  2. Hold down the Ctrl key while you select the object whose placement you want to change.
  3. Select the Edit → Alignment... option from the menu.
  4. A new window will appear in the Main view area. This window consists of two views: on the left the movable object is displayed and on the right the fixed object.
  5. Define the first point pair by clicking a point in each view. This point pair is used to move the movable object.
  6. Define one or two more point pairs if you also want to rotate the movable object.
  7. Right-click one of the views and select the Align option from the context menu to complete the command.

Opcje

The following additional options are available in the context menu:

  • Select the Remove last point option to remove the last point in the view.
  • Select the Cancel option to abort the command.
  • Check the Syncronize views option if any view changes (pan, rotate and zoom) should be applied to both views.