Szkicownik: Zmień orientację szkicu

From FreeCAD Documentation
Revision as of 16:09, 22 January 2020 by Kaktus (talk | contribs) (Created page with "{{Docnav/pl |Mapuj szkic na ścianę |Sprawdź poprawność szkicu |Sketcher |IconL=Sketcher_MapSketc...")

Sketcher Reorient

Lokalizacja w menu
Part design → Reorient sketch
Środowisko pracy
Sketcher, PartDesign
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Map sketch, New Sketch

Description

Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).

How to use

  1. Select the sketch to be re-oriented in the tree-view
  2. Choose Sketch Reorient sketch from the top menu
  3. A menu will pop up and ask you if you want to detach the sketch from its face
  4. Selecting Yes will give you the same menu as in Sketch New Sketch
  5. You can attach the sketch to one of the main planes
  6. You also have the possibility to add a positive or negative offset

Uwagi

  • Po wybraniu Anuluj w drugim menu szkic jest po prostu oderwany od powierzchni.
  • Dopóki nie zostanie wybrany szkic, komenda jest nieaktywna.