Sketcher CreateArcOfHyperbola/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Użycie==")
(Created page with "{{Docnav/pl |Utwórz łuk na podstawie elipsy |Utwórz łuk na podstawie paraboli |środowisko pracy Szkicownik |IconL=Sketcher_CreateArcOfEllipse.svg |IconR=Sketcher_CreateArcOfParabola.svg |IconC=Workbench_Sketcher.svg }}")
Line 37: Line 37:




{{Docnav
{{Docnav/pl
|[[Sketcher_CreateArcOfEllipse|Arc of ellipse]]
|[[Sketcher_CreateArcOfEllipse/pl|Utwórz łuk na podstawie elipsy]]
|[[Sketcher_CreateArcOfParabola|Arc of parabola]]
|[[Sketcher_CreateArcOfParabola/pl|Utwórz łuk na podstawie paraboli]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench/pl|środowisko pracy Szkicownik]]
|IconL=Sketcher_CreateArcOfEllipse.svg
|IconL=Sketcher_CreateArcOfEllipse.svg
|IconR=Sketcher_CreateArcOfParabola.svg
|IconR=Sketcher_CreateArcOfParabola.svg

Revision as of 10:14, 18 March 2023

Szkicownik: Utwórz łuk na podstawie hiperboli

Lokalizacja w menu
Szkic → Elementy geometryczne szkicownika → Utwórz łuk na podstawie elipsy
Środowisko pracy
Szkicownik
Domyślny skrót
G H
Wprowadzono w wersji
0.17
Zobacz także
Utwórz łuk na podstawie elipsy, Utwórz łuk na podstawie paraboli

Opis

To narzędzie tworzy łuk hiperboli poprzez środek, promień główny i punkty końcowe.

Użycie

  1. Press the Create an arc of hyperbola button.
  2. Click in the 3D view to define the major radius center (labelled 1 in the picture above).
  3. Click in the 3D view to define the major radius length, which is also the tip of the arc of hyperbola (labelled 2 in the picture above).
  4. Move the mouse away from the two last selected points to see how the arc will look like. Click again when the approximate desired curvature is shown. This point will define the first end point (labelled 3 in the picture above).
  5. Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).