Sketcher CreateArcOfHyperbola/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "To narzędzie tworzy łuk hiperboli poprzez środek, promień główny i punkty końcowe.")
(Created page with "==Użycie==")
Line 27: Line 27:
[[File:Sketcher Arc of Hyperbola 01.png]]
[[File:Sketcher Arc of Hyperbola 01.png]]


==Usage==
<span id="Usage"></span>
==Użycie==


# Press the {{Button|[[File:Sketcher_CreateArcOfHyperbola.svg|16px]] [[Sketcher_CreateArcOfHyperbola|Create an arc of hyperbola]]}} button.
# Press the {{Button|[[File:Sketcher_CreateArcOfHyperbola.svg|16px]] [[Sketcher_CreateArcOfHyperbola|Create an arc of hyperbola]]}} button.

Revision as of 10:13, 18 March 2023

Szkicownik: Utwórz łuk na podstawie hiperboli

Lokalizacja w menu
Szkic → Elementy geometryczne szkicownika → Utwórz łuk na podstawie elipsy
Środowisko pracy
Szkicownik
Domyślny skrót
G H
Wprowadzono w wersji
0.17
Zobacz także
Utwórz łuk na podstawie elipsy, Utwórz łuk na podstawie paraboli

Opis

To narzędzie tworzy łuk hiperboli poprzez środek, promień główny i punkty końcowe.

Użycie

  1. Press the Create an arc of hyperbola button.
  2. Click in the 3D view to define the major radius center (labelled 1 in the picture above).
  3. Click in the 3D view to define the major radius length, which is also the tip of the arc of hyperbola (labelled 2 in the picture above).
  4. Move the mouse away from the two last selected points to see how the arc will look like. Click again when the approximate desired curvature is shown. This point will define the first end point (labelled 3 in the picture above).
  5. Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).