Std: Zaznacz obszar

From FreeCAD Documentation
Revision as of 11:31, 16 May 2022 by Kaktus (talk | contribs) (Created page with "==Użycie==")

Std: Zaznacz obszar

Lokalizacja w menu
Edycja → Zaznacz obszar
Środowisko pracy
wszystkie
Domyślny skrót
Shift + B
Wprowadzono w wersji
-
Zobacz także
Wybór elementów ramką zaznaczenia, Zaznacz wszystko

Opis

Polecenie Zaznacz obszar wybiera obiekty z prostokątnego obszaru zdefiniowanego przez użytkownika za pomocą ramki zaznaczenia, w oknie widoku 3D.

Użycie

  1. There are several ways to invoke the command:
    • Select the Edit → Box selection option from the menu.
    • Use the keyboard shortcut: Shift+B.
  2. Do one of the following:
    • Drag a rectangle from left to right to select objects whose geometric center lies inside the rectangle.
    • Drag a rectangle from right to left to select objects whose bounding box is (partially) inside the rectangle, or touches it.

Notes

  • Use the Std BoxElementSelection command to box select faces instead of objects.
  • This command cannot be used to select elements in a sketch. To 'box select' when the Sketcher Dialog is open:
    1. Make sure that no command is active.
    2. Do one of the following:
      • Click in an empty area and drag a rectangle from left to right to select objects that lie completely inside the rectangle.
      • Click in an empty area and drag a rectangle from right to left to also select objects that touch or cross the rectangle.