Sketcher CreateLine/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Jak używać==")
(Created page with "{{Docnav/pl |Utwórz punkt |Utwórz łuk ... |Sketcher |IconL=Sketcher_CreatePoint.png |Ico...")
Line 37: Line 37:




{{Docnav
{{Docnav/pl
|[[Sketcher_CreatePoint|Point]]
|[[Sketcher_CreatePoint/pl|Utwórz punkt]]
|[[Sketcher_CompCreateArc|Create an arc]]
|[[Sketcher_CompCreateArc/pl|Utwórz łuk ...]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench/pl|Sketcher]]
|IconL=Sketcher_CreatePoint.png
|IconL=Sketcher_CreatePoint.png
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg

Revision as of 17:54, 26 January 2020

Sketcher Utwórz linię

Lokalizacja w menu
Sketch → Elementy geometryczne szkicownika → Tworzenie linii
Środowisko pracy
Sketcher
Domyślny skrót
L
Wprowadzono w wersji
-
Zobacz także
Sketcher: Polilinia

Opis

Narzędzie to rysuje linię, wybierając dwa punkty w widoku 3D. Po uruchomieniu narzędzia kursor myszki zmienia się w biały krzyż z czerwoną ikoną linii. Poza tym wyświetlane są współrzędne w czasie rzeczywistym.

The created line object starts and ends at the given points, but the line is infinite regarding the constraints Tangent, Point On Object and Internal Angle. This means for example, that a point with the constraint Point On Object may not be located between the two given points but can lie outside of the two points on the extension of the drawn line.


Jak używać

  • Pick points on an empty area of the 3d view, or on an existing object (auto constraints must be active in TaskView).
  • Pressing Esc or clicking the right mouse button cancels the function.