Part Section/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Właściwości==")
(Created page with "Zobacz również stronę: Edytor właściwości.")
Line 38: Line 38:
==Właściwości==
==Właściwości==


See also: [[Property_editor|Property editor]].
Zobacz również stronę: [[Property_editor/pl|Edytor właściwości]].


A PartDesign Section object is derived from a [[Part_Feature|Part Feature]] object and inherits all its properties. It also has the following additional properties:
A PartDesign Section object is derived from a [[Part_Feature|Part Feature]] object and inherits all its properties. It also has the following additional properties:

Revision as of 18:32, 14 June 2022

Część: Przecięcie

Lokalizacja w menu
Część → Logiczne → Przecięcie
Środowisko pracy
Część
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Przekrój poprzeczny

Opis

Polecenie Przecięcie' tworzy geometrię polilinii na przecięciach dwóch obiektów. Wynik jest w pełni parametryczny.

  • An intersection of two solids/faces results in one or more section lines.
  • An intersection of two lines, or a line and a solid/face, results in one or more points.

A cube sectioned with a cylinder

Użycie

  1. Wybierz dwa obiekty.
  2. Pierwszym obiektem będzie DANEBaza przekroju, ale kolejność wyboru nie ma wpływu na wynik.
  3. Polecenie można wywołać na kilka sposobów:
    • Naciśnij przycisk Przecięcie.
    • Wybierz z menu opcję Część → Przecięcie.

Właściwości

Zobacz również stronę: Edytor właściwości.

A PartDesign Section object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Base

  • DANEBase (Link): Link to the first object.
  • DANETool (Link): Link to the second object.

Boolean

  • DANE (hidden)History (ShapeHistory): "Shape history".
  • DANERefine (Bool): "Refine shape (clean up redundant edges) after this boolean operation". The default value is determined by the Automatically refine model after sketch-based operation preference. See PartDesign Preferences.

Section

  • DANEApproximation (Bool): Approximate the output edges.

Odnośniki internetowe

Aby utworzyć przekroje za pomocą płaszczyzny przekroju, zobacz stronę

Przekrój poprzeczny.