Część: Połączenie

From FreeCAD Documentation
Revision as of 17:28, 26 June 2021 by Kaktus (talk | contribs) (Created page with "===Obsługiwane dane wejściowe===")

Część: Suman

Lokalizacja w menu
Część → Operacje logiczne → Suma
Środowisko pracy
Część
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Wytnij, Część wspólna, Operacje logiczne

Opis

Narzędzie Suma łączy (jednoczy) wybrane obiekty środowiska Części w jeden. Ta operacja jest w pełni parametryczna i komponenty mogą być modyfikowane, a wynik ponownie obliczany.

Uwaga: To polecenie jest zautomatyzowaną formą Operacji na bryłach.

Użycie

  1. Wybierz dwa lub więcej kształtów
  2. Istnieje kilka sposobów na wywołanie polecenia:
    • Naciśnij przycisk Utwórz sumę kilku kształtów na pasku narzędzi Narzędzia środowiska Część
    • Użyj pozycji z menu Część → Funkcje logiczne → Suma.

Obsługiwane dane wejściowe

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.

  • Solid + Solid: the result is a solid that occupies all the volume covered by the inputs
  • Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.
  • Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.

Compounds are supported; however, it is assumed that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.

Options

Items can be added and removed from the fusion, by dragging them in or out of the fusion feature in the tree view with the mouse. A manual recompute (press F5 key or click on the Refresh/Recompute icon) is required to see the results.

After this operation is complete, it may be necessary to clean up the shape with RefineShape.