Part Fuse/pl: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "{{Docnav/pl |Wytnij |Część wspólna |Środowisko pracy Część |IconL=Part_Cut.svg |IconR=Part_Common.svg |IconC=Work...")
Line 48: Line 48:




{{Docnav
{{Docnav/pl
|[[Part_Cut|Cut]]
|[[Part_Cut/pl|Wytnij]]
|[[Part_Common|Common]]
|[[Part_Common/pl|Część wspólna]]
|[[Part_Module|Part]]
|[[Part_Module/pl|Środowisko pracy Część]]
|IconL=Part_Cut.svg
|IconL=Part_Cut.svg
|IconR=Part_Common.svg
|IconR=Part_Common.svg

Revision as of 17:31, 26 June 2021

Część: Suman

Lokalizacja w menu
Część → Operacje logiczne → Suma
Środowisko pracy
Część
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Wytnij, Część wspólna, Operacje logiczne

Opis

Narzędzie Suma łączy (jednoczy) wybrane obiekty środowiska Części w jeden. Ta operacja jest w pełni parametryczna i komponenty mogą być modyfikowane, a wynik ponownie obliczany.

Uwaga: To polecenie jest zautomatyzowaną formą Operacji na bryłach.

Użycie

  1. Wybierz dwa lub więcej kształtów
  2. Istnieje kilka sposobów na wywołanie polecenia:
    • Naciśnij przycisk Utwórz sumę kilku kształtów na pasku narzędzi Narzędzia środowiska Część
    • Użyj pozycji z menu Część → Funkcje logiczne → Suma.

Obsługiwane dane wejściowe

Obiekty wejściowe muszą być kształtami OpenCascade. Przykłady: obiekty wykonane z użyciem Środowisk pracy Part, Part Design, Sketcher. Nie mogą to być siatki (chyba że zostały zamienione na kształty) - dla siatek, w programie Mesh Design istnieją specyficzne narzędzia do przeprowadzania operacji logicznych.

  • Solid + Solid: the result is a solid that occupies all the volume covered by the inputs
  • Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.
  • Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.

Compounds are supported; however, it is assumed that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.

Options

Items can be added and removed from the fusion, by dragging them in or out of the fusion feature in the tree view with the mouse. A manual recompute (press F5 key or click on the Refresh/Recompute icon) is required to see the results.

After this operation is complete, it may be necessary to clean up the shape with RefineShape.