Part Common/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "===Jak używać=== # Zaznacz dwa kształty. # Naciśnij przycisk {{Button|16px Utwórz iloczyn dwóch obiektów}}.")
(Created page with "===Obsługiwane dane wejściowe===")
Line 23: Line 23:
# Naciśnij przycisk {{Button|[[Image:Part Common.png|16px]] [[Part Common|Utwórz iloczyn dwóch obiektów]]}}.
# Naciśnij przycisk {{Button|[[Image:Part Common.png|16px]] [[Part Common|Utwórz iloczyn dwóch obiektów]]}}.


===Obsługiwane dane wejściowe===
=== Supported inputs ===


Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.
Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.

Revision as of 16:55, 26 January 2020

Part: Utwórz iloczyn

Lokalizacja w menu
Part → Part: Utwórz iloczyn dwóch obiektów
Środowisko pracy
Part
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Utwórz sumę ..., Utwórz różnicę ...

Wydobywa część wspólną (przecięcie) pomiędzy wybranymi obiektami Part. Operacja ta jest w pełni parametryczna i komponenty mogą być modyfikowane, a wynik ponownie obliczany.

Jak używać

  1. Zaznacz dwa kształty.
  2. Naciśnij przycisk Utwórz iloczyn dwóch obiektów.

Obsługiwane dane wejściowe

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.