Część: Konstruktor kształtu

From FreeCAD Documentation
Revision as of 04:52, 9 May 2021 by Kaktus (talk | contribs) (Replaced content with "==Użycie==")

Część: Konstruktor

Lokalizacja w menu
Część → Konstruktor kształtu ...
Środowisko pracy
Część
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Utwórz bryłę pierwotną

Opis

Narzędzie to służy do tworzenia bardziej złożonych kształtów z różnych geometrycznych prymitywów parametrycznych.

Użycie

  1. Select two vertices
  2. Click on Create

Wire from edges

introduced in version 0.18

  1. Select a set of adjacent edges in the 3D view
  2. Click on Create

Face from vertices

  1. Select vertices bounding the face in the 3D view
  2. Select if face should be planar
  3. Click on Create
  4. Object will be created in 3D view and will be listed in tree view

Face from edges

  1. Select a closed set of edges bounding the face in the 3D view
  2. Select if face should be planar
  3. Click on Create
  4. Object will be created in 3D view and will be listed in tree view

Shell from faces

  1. Select faces in the 3D view
  2. Select if the shape should be refined
  3. Select if all faces should be included in shell
  4. Click on Create
  5. Object will be created in 3D view and will be listed in tree view

Solid from shell

  1. Select if the shape should be refined
  2. Click on Create
  3. Object will be created in 3D view and will be listed in tree view

Ograniczenia


Jak używać

Jednym z możliwych rozwiązań może być przepływ pracy:

  • Narysuj szkielet modelu o wybranym kształcie za pomocą narzędzi Środowiska pracy Rysunek roboczy (np. linii i linii łamanej).
  • Utwórz wszystkie powierzchnie z powierzchnią od krawędzi.
  • Utwórz powłokę na powierzchni.
  • Utwórz bryłę z powłoki.