Part Builder/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opis== Narzędzie to służy do tworzenia bardziej złożonych kształtów z różnych geometrycznych prymitywów parametrycznych.")
(Created page with "==Ograniczenia== <br />")
Line 48: Line 48:
##Object will be created in 3D view and will be listed in tree view
##Object will be created in 3D view and will be listed in tree view


==Limitations==
==Ograniczenia==
<br />
<br />



Revision as of 14:51, 9 February 2020

Part: Konstruktor kształtów

Lokalizacja w menu
Część → Konstruktor kształtów...
Środowisko pracy
Part
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Part: Utwórz bryłę

Opis

Narzędzie to służy do tworzenia bardziej złożonych kształtów z różnych geometrycznych prymitywów parametrycznych.

Use

This tool will let you create shapes by creating

  1. Edge from two vertices
  2. Face from vertices
    1. Select vertices bounding the face in the 3D view
    2. Select if face should be planar
    3. Click on Create
    4. Object will be created in 3D view and will be listed in tree view
  3. Wire from edges introduced in version 0.18
    1. Select a set of adjacent edges in the 3D view
    2. Click on Create
  4. Face from edges
    1. Select a closed set of edges bounding the face in the 3D view
    2. Select if face should be planar
    3. Click on Create
    4. Object will be created in 3D view and will be listed in tree view
  5. Shell from faces
    1. Select faces in the 3D view
    2. Select if the shape should be refined
    3. Select if all faces should be included in shell
    4. Click on Create
    5. Object will be created in 3D view and will be listed in tree view
  6. Solid from shell
    1. Select if the shape should be refined
    2. Click on Create
    3. Object will be created in 3D view and will be listed in tree view

Ograniczenia


Notes

A possible workflow could be:

  • Draw a wireframe-model of your shape using the tools in the draft-workbench (for example line and dwire)
  • Create all faces with "face from edges"
  • Create a "shell from faces"
  • Create a "solid from shell"