Część: Helisa
Część: Helisa |
Lokalizacja w menu |
---|
Część → Utwórz geometrie pierwotne → Helisa |
Środowisko pracy |
Część, OpenSCAD |
Domyślny skrót |
brak |
Wprowadzono w wersji |
- |
Zobacz także |
Utwórz geometrię pierwotną |
Description
A Part Helix is a parametric shape that can be created with the Part Primitives command. In the coordinate system defined by its DANEPlacement property, the axis of the helix matches the Z axis and its bottom point, the start point, lies on the X axis.
Usage
See Part Primitives.
Example
A Part Helix object created with the scripting example below is shown here.
Notes
- A Part Helix can be used to create screw threads. See Thread for Screw Tutorial.
Properties
See also: Property editor.
A Part Helix object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Attachment
The object has the same attachment properties as a Part Part2DObject.
Coordinate System
- DANELocal Coord (
Enumeration
): The handedness, or direction, of the helix:Right-handed
orLeft-handed
. The default isRight-handed
, meaning the helix turns counterclockwise as it goes up.
Helix
- DANEPitch (
Length
): The distance between two consecutive turns of the helix measured along its Z axis. The default is1mm
. - DANEHeight (
Length
): The height of the helix. The default is2mm
. - DANERadius (
Length
): The start radius of the helix. The helix has a constant radius if DANEAngle is0°
. - DANESegment Length (
QuantityConstraint
): The number of turns per helix subdivision. The default is1
, meaning each full turn of the helix is a separate segment. Use0
to suppress subdivision. - DANEAngle (
Angle
): The angle that defines of the outer shape of the helix. Valid range:-90° < value < 90°
. The default is0°
. If it is0°
the helix is cylindrical, else it is conical.
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Helix can be created with the addObject()
method of the document:
helix = FreeCAD.ActiveDocument.addObject("Part::Helix", "myHelix")
- Where
"myHelix"
is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
helix = doc.addObject("Part::Helix", "myHelix")
helix.Pitch = 2
helix.Height = 3
helix.Radius = 4
helix.SegmentLength = 21
helix.Angle = 45
helix.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(75, 60, 30))
doc.recompute()
- Bryły pierwotne: Prostopadłościan, Walec, Sfera, Stożek, Torus, Rura, Bryły pierwotne, Konstruktor kształtu
- Tworzenie i modyfikacja: Wyciągnij, Wyciągnij przez obrót, Odbicie lustrzane, Zaokrąglenie, Fazka, Utwórz ścianę z linii łamanych, Powierzchnia prostokreślna, Wyciągnięcie przez profile, Wyciągnięcie po ścieżce, Przecięcie, Przekrój poprzeczny, Odsunięcie 3D, Odsunięcie 2D, Grubość, Rzutowanie na powierzchnię, Mocowanie
- Funkcje logiczne: Utwórz złożenie, Rozbij złożenie, Filtr złożeń, Funkcje logiczne, Wytnij, Połączenie, Część wspólna, Przyłącz, Dołącz do osadzenia, Wycięcie połączenia, Funkcja logiczna rozdzielająca, Pokrój część, Krojenie, XOR
- Wymiarowanie: Wymiarowanie liniowe, Wymiarowanie kątowe, Odśwież wymiary, Usuń wymiary, Przełącz widoczność wymiaru, Przełącz widoczność wymiarów przestrzennych, Przełącz widoczność wymiarów przyrostowych
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework