Projekt Części: Grubość
PartDesign Thickness |
Menu location |
---|
Part Design → Apply a dress-up feature → Thickness |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
0.17 |
See also |
Part Thickness |
Description
The Thickness tool works on a solid Body and transforms it into a thick-walled hollow object with at least one open face, giving to each of its remaining faces a uniform thickness. On some solids it allows you to significantly speed up the work, and avoids making extrusions and pockets.
The thickness tool applied to a face (B) of a solid (A), resulting in the hollow object (C).
Usage
- Select one or more face(s) on the active Body.
- Press the Thickness button.
- Define the Thickness parameters (see Options).
- To add more faces to open, press the Add face button and select a face in the 3D view.
- To remove a previously select face, press the Remove face button and select a face in the 3D view, or right-click on the Face label in the list and select Remove.
- Press OK.
Options
- Thickness: Wall thickness of the resulting object. Set the desired value.
- Mode
- Skin: Select this option if you want to get an item like a vase, headless but with the bottom
- Pipe: Select this option if you want to get an object like a pipe, headless and bottomless. In this case it may be convenient to select the faces to be deleted before you start the tool. Helping with predefined views buttons or use the numeric keys.
- Recto Verso:
- Join Type
- Arc: removes the outer edges and creates a fillet with a radius equal to the defined thickness.
- Intersection: when faces are offset outward, sharp edges are kept between faces.
- Make thickness inwards: when checked, faces are offset inward.
Limitations
- At least one face to be opened must be selected.
- If thickness goes inwards, the value must be smaller than the smallest height of the Body.
- The command may fail with complex shapes. In this context the surface of e.g. a cone has already to be regarded as complex.
- Additive Pipe or Additive Loft may work better to create complex shapes
Example
- Create a Pad from the sketch
- Create a second sketch on the XY plane
- Create a second Pad from the second sketch
As in the following pictures:
Then
Known Errors
- BRep_API: command not done
- BRep_Tool: no parameter on edge
- Silently Fails
środowisko pracy Projekt Części
- Narzędzia struktury: Część, Grupa
- Narzędzia wspomagające: Utwórz zawartość, Nowy szkic, Edycja szkicu, Mapuj szkic na ścianę, Sprawdź poprawność szkicu , Sprawdź geometrię, Łącznik kształtów podrzędnych, Utwórz klona, Płaszczyzna odniesienia, Linia odniesienia, Punkt odniesienia, Lokalny układ współrzędnych
- Narzędzia do modelowania
- Narzędzia addytywne: Wyciągnięcie, Wyciągnij przez obrót, Wyciągnięcie przez profile, Wyciągnięcie po ścieżce, Addytywna helisa, Addytywny sześcian, Addytywny walec,Addytywna sfera, Addytywny stożek, Addytywna elipsoida, Addytywny torus, Addytywny graniastosłup, Addytywny klin
- Narzędzia subtraktywne: Kieszeń, Otwór, Rowek, Subtraktywne wyciągnięcie przez profile, Subtraktywne wyciągnięcie po ścieżce, Subtraktywna helisa, Subtraktywny sześcian, Subtraktywny walec, Subtraktywna sfera, Subtraktywny stożek, Subtraktywna elipsoida, Subtraktywny torus,Subtraktywny graniastosłup, Subtraktywny klin
- Narzędzia operacji logicznych Funkcje logiczne
- Narzędzia ulepszające: Zaokrąglenie, Fazka, Pochylenie ścian, Grubość
- Narzędzia do transformacji: Odbicie lustrzane, Szyk liniowy, Szyk kołowy, Transformacja wielokrotna, Skaluj
- Dodatki: Przenieś, Koło łańcuchowe, Koło zębate ewolwentowe, Kreator projektowania wału
- Narzędzia menu kontekstowego: Ustaw czubek, Przenieś cechę, Przenieś cechę w drzewie, Wygląd zewnętrzny, Ustaw kolor
- Preferencje: Ustawienia, Dostrajanie parametrów
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework