PartDesign SubtractiveHelix/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "===Oś===")
(Created page with "Ta opcja określa oś, wokół której szkic ma być obracany. * '''Oś normalna do szkicu''': wybiera normalną szkicu, która przechodzi przez początek szkicu jako oś. {{Version/pl|0.20}}. * '''Pionowa oś szkicu''': wybiera pionową oś szkicu. * '''Pozioma oś szkicu''': wybiera poziomą oś szkicu. * '''Linia konstrukcyjna''': wybiera linię konstrukcyjną zawartą w szkicu używanym przez helisę. Lista rozwijana będzie zawierać pozycję dla każdej linii konst...")
Line 47: Line 47:
===Oś===
===Oś===


Ta opcja określa oś, wokół której szkic ma być obracany.
This option specifies the axis about which the sketch is to be swept.
* '''Normal sketch axis''': selects the normal of the sketch that runs through the sketch origin as axis. {{Version|0.20}}
* ''' normalna do szkicu''': wybiera normalną szkicu, która przechodzi przez początek szkicu jako . {{Version/pl|0.20}}.
* '''Vertical sketch axis''': selects the vertical sketch axis.
* '''Pionowa szkicu''': wybiera pionową szkicu.
* '''Horizontal sketch axis''': selects the horizontal sketch axis.
* '''Pozioma szkicu''': wybiera poziomą szkicu.
* '''Linia konstrukcyjna''': wybiera linię konstrukcyjną zawartą w szkicu używanym przez helisę. Lista rozwijana będzie zawierać pozycję dla każdej linii konstrukcyjnej. Pierwsza linia konstrukcyjna utworzona w szkicu będzie oznaczona jako ''Linia konstrukcyjna 1''.
* '''Construction line''': selects a construction line contained in the sketch used by the Helix. The drop down list will contain an entry for each construction line. The first construction line created in the sketch will be labelled ''Construction line 1''.
* '''Base (X/Y/Z) axis''': selects the X, Y or Z axis of the Body's Origin;
* '''Oś bazowa (X/Y/Z)''': wybiera X, Y lub Z punktu położenia odniesienia bryły.
* '''Select reference...''': allows selection in the 3D view of an edge on the Body, or a [[PartDesign_Line|datum line]].
* '''Wybierz odniesienie ...''': umożliwia wybór w oknie widoku 3D krawędzi na bryle lub [[PartDesign_Line/pl|linii odniesienia]].


=== Mode ===
=== Mode ===

Revision as of 04:04, 18 June 2023

Projekt Części: Subtraktywna helisa

Lokalizacja w menu
Projekt Części → Utwórz cechę przez odjęcie → Subtraktywna helisa
Środowisko pracy
Projekt Części
Domyślny skrót
brak
Wprowadzono w wersji
0.19
Zobacz także
Addytywna helisa

Opis

Narzędzie Subtraktywna helisa modyfikuje bryłę poprzez przesuwanie wybranego szkicu lub obiektu 2D po ścieżce spiralnej wycinającej materiał.

Profil (B) jest przesuwany wokół osi (A) w celu wytworzenia spiralnego rowka (C) w istniejącym wcześniej elemencie obrabianym.

Użycie

  1. Wybierz szkic, który ma zostać przekształcony w helisę. Alternatywnie można użyć ściany na istniejącej bryle.
  2. Naciśnij przycisk Subtraktywna helisa.
  3. Ustaw parametry helisy (patrz następna sekcja).
  4. Sprawdź helisę w oknie widoku, aby upewnić się, że parametry nie powodują samo przecinającej się helisy.
  5. Naciśnij OK.

Opcje

Podczas tworzenia helisy okno dialogowe Parametry helisy oferuje kilka różnych właściwości określających sposób przeciągnięcia szkicu.

Ta opcja określa oś, wokół której szkic ma być obracany.

  • Oś normalna do szkicu: wybiera normalną szkicu, która przechodzi przez początek szkicu jako oś. dostępne w wersji 0.20.
  • Pionowa oś szkicu: wybiera pionową oś szkicu.
  • Pozioma oś szkicu: wybiera poziomą oś szkicu.
  • Linia konstrukcyjna: wybiera linię konstrukcyjną zawartą w szkicu używanym przez helisę. Lista rozwijana będzie zawierać pozycję dla każdej linii konstrukcyjnej. Pierwsza linia konstrukcyjna utworzona w szkicu będzie oznaczona jako Linia konstrukcyjna 1.
  • Oś bazowa (X/Y/Z): wybiera oś X, Y lub Z punktu położenia odniesienia bryły.
  • Wybierz odniesienie ...: umożliwia wybór w oknie widoku 3D krawędzi na bryle lub linii odniesienia.

Mode

This controls what parameters will be used to define the helix. The choices are:

  • Pitch-Height-Angle: definition via the height per turn and the overall height
  • Pitch-Turns-Angle: definition via the height per turn and the number of turns
  • Height-Turns-Angle: definition via the overall height and the number of turns
  • Height-Turns-Growth introduced in version 0.20: definition via the overall height, the number of turns and the growth of the helical radius. So a Height of zero leads to a path in form of a spiral. A Height and Growth of zero to leads to a path in form of a circle.

Pitch

The distance between turns in the helix.

Height

The height of the helix (center-center).

Turns

The number of turns in the helix. Define as Height/Pitch

Cone Angle

Angle of the cone that forms a hull around the helix. Allowable range: [-89°, +89°].

Left handed

If checked, the turning direction of helix is reversed from default clockwise to counterclockwise.

Reversed

If checked, the axis direction of helix is reversed from default.

Remove outside of profile

If checked, the result will be the intersection of the swept profile and the preexisting body.

Update view

If checked, the helix will be shown in the view, and updated automatically on every change of the parameters.

Preferences

  • A subtractive helix that does not intersect the body will be visible in the preview if Tools → Edit parameters... → BaseApp → Preferences → Mod → PartDesign → SubtractiveHelixPreview is set to true. The default for this preference is true. introduced in version 0.20

Properties

  • DANEPitch: The axial distance between two turns.
  • DANEHeight: The total length of the helix (not accounting for the extent of the profile)
  • DANETurns: The number of turns (does not need to be a whole number)
  • DANELeft Handed: See Left Handed.
  • DANEReversed: See Reversed.
  • DANEAngle: The rate at which the radius of the helix increase along the axis. Allowable range: [-89°, +89°].
  • DANEReference axis: The helix axis
  • DANEMode: The helix input mode (pitch-height, pitch-turns, turns-height)
  • DANEOutside: If true, the result will be the intersection of the swept profile and the preexisting body.
  • DANEHas Been Edited: If false, the tool will propose an initial value for pitch based on the profile bounding box, so that self intersection is avoided.
  • DANERefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
  • DANEProfile: Either a sketch containing a closed contour, or a face.
  • DANEMidplane: Not used.
  • DANEUp to face: Not used.
  • DANEAllow multiple face: Not used.