Part Line/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Użycie==")
(Created page with "Zobacz stronę Geometrie pierwotne.")
Line 28: Line 28:
==Użycie==
==Użycie==


See [[Part_Primitives#Usage|Part Primitives]].
Zobacz stronę [[Part_Primitives/pl#Użycie|Geometrie pierwotne]].


== Properties ==
== Properties ==

Revision as of 06:36, 24 June 2023

Część: Płaszczyzna

Lokalizacja w menu
Część → Utwórz geometrie pierwotne ... → Linia
Środowisko pracy
Część, OpenSCAD
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Utwórz geometrie pierwotne

Opis

Linia jest obiektem linii parametrycznej, którą można utworzyć za pomocą polecenia Utwórz geometrie pierwotne .... Współrzędne jej punktu początkowego i końcowego odnoszą się do układu współrzędnych zdefiniowanego przez jej właściwość DANEUmiejscowienie.

Użycie

Zobacz stronę Geometrie pierwotne.

Properties

See also: Property editor.

A Part Line object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Vertex 1 - Start

  • DANEX1 (Distance): The X coordinate of the start point of the line. The default is 0mm.
  • DANEY1 (Distance): The Y coordinate of the start point of the line. The default is 0mm.
  • DANEZ1 (Distance): The Z coordinate of the start point of the line. The default is 0mm.

Vertex 2 - Finish

  • DANEX2 (Distance): The X coordinate of the end point of the line. The default is 10mm.
  • DANEY2 (Distance): The Y coordinate of the end point of the line. The default is 10mm.
  • DANEZ2 (Distance): The Z coordinate of the end point of the line. The default is 10mm.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Line can be created with the addObject() method of the document:

line = FreeCAD.ActiveDocument.addObject("Part::Line", "myLine")
  • Where "myLine" is the name for the object.
  • The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

line = doc.addObject("Part::Line", "myLine")
line.X1 = 1
line.Y1 = 3
line.Z1 = 6
line.X2 = 2
line.Y2 = 3
line.Z2 = 9

doc.recompute()