PartDesign AdditiveBox/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opis==")
(Created page with "Wstawia pierwotny prostopadłościan do aktywnej bryły jako pierwszy element lub łączy ją z istniejącymi elementami.")
Line 22: Line 22:
==Opis==
==Opis==


Wstawia pierwotny prostopadłościan do aktywnej bryły jako pierwszy element lub łączy ją z istniejącymi elementami.
Inserts a primitive box in the active Body as the first feature, or fuses it to the existing feature(s).


[[File:PartDesign_AdditiveBox_example.png|200px]]
[[File:PartDesign_AdditiveBox_example.png|200px]]

Revision as of 05:22, 17 June 2023

Projekt Części: Addytywny sześcian

Lokalizacja w menu
Projekt Części → Utwórz cechę przez dodanie → Addytywny sześcian
Środowisko pracy
Projekt Części
Domyślny skrót
brak
Wprowadzono w wersji
0.17
Zobacz także
Komponent bryła pierwotna do dodania, Subtraktywny sześcian

Opis

Wstawia pierwotny prostopadłościan do aktywnej bryły jako pierwszy element lub łączy ją z istniejącymi elementami.

Usage

  1. Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Options

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DANEAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • DANELabel: Label given to the Box object. Change to suit your needs.
  • DANELength: the Box's dimension in the X-direction.
  • DANEWidth: the Box's dimension in the Y-direction.
  • DANEHeight: the Box's dimension in the Z-direction.