PartDesign AdditiveBox/pl: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "{{GuiCommand/pl |Name=PartDesign AdditiveBox |Name/pl=Projekt Części: Addytywny sześcian |MenuLocation=Projekt Części → Utwórz cechę przez dodanie → Addytywny sześcian |Workbenches=Projekt Części |Version=0.17 |SeeAlso=Komponent bryła pierwotna do dodania, Subtraktywny sześcian }}")
Line 10: Line 10:
}}
}}


{{GuiCommand
{{GuiCommand/pl
|Name=PartDesign AdditiveBox
|Name=PartDesign AdditiveBox
|Name/pl=Projekt Części: Addytywny sześcian
|MenuLocation=Part Design → Create an additive primitive → Additive Box
|MenuLocation=Projekt Części → Utwórz cechę przez dodanie → Addytywny sześcian
|Workbenches=[[PartDesign_Workbench|PartDesign]]
|Workbenches=[[PartDesign_Workbench/pl|Projekt Części]]
|Version=0.17
|Version=0.17
|SeeAlso=[[PartDesign_CompPrimitiveAdditive|PartDesign CompPrimitiveAdditive]], [[PartDesign_SubtractiveBox|PartDesign SubtractiveBox]]
|SeeAlso=[[PartDesign_CompPrimitiveAdditive/pl|Komponent bryła pierwotna do dodania]], [[PartDesign_SubtractiveBox/pl|Subtraktywny sześcian]]
}}
}}



Revision as of 05:14, 17 June 2023

Projekt Części: Addytywny sześcian

Lokalizacja w menu
Projekt Części → Utwórz cechę przez dodanie → Addytywny sześcian
Środowisko pracy
Projekt Części
Domyślny skrót
brak
Wprowadzono w wersji
0.17
Zobacz także
Komponent bryła pierwotna do dodania, Subtraktywny sześcian

Description

Inserts a primitive box in the active Body as the first feature, or fuses it to the existing feature(s).

Usage

  1. Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Options

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DANEAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • DANELabel: Label given to the Box object. Change to suit your needs.
  • DANELength: the Box's dimension in the X-direction.
  • DANEWidth: the Box's dimension in the Y-direction.
  • DANEHeight: the Box's dimension in the Z-direction.