PartDesign AdditiveBox/pl: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "{{Docnav/pl |Komponent bryła pierwotna do dodania |Additive cylinder |środowisko pracy Projekt Części |IconL=PartDesign_CompPrimitiveAdditive.png |IconR=PartDesign_AdditiveCylinder.svg |IconC=Workbench_PartDesign.svg }}")
Line 1: Line 1:
<languages/>
<languages/>


{{Docnav
{{Docnav/pl
|[[PartDesign_CompPrimitiveAdditive|Create an additive primitive]]
|[[PartDesign_CompPrimitiveAdditive/pl|Komponent bryła pierwotna do dodania]]
|[[PartDesign_AdditiveCylinder|Additive cylinder]]
|[[PartDesign_AdditiveCylinder/pl|Additive cylinder]]
|[[PartDesign_Workbench|PartDesign]]
|[[PartDesign_Workbench/pl|środowisko pracy Projekt Części]]
|IconL=PartDesign_CompPrimitiveAdditive.png
|IconL=PartDesign_CompPrimitiveAdditive.png
|IconR=PartDesign_AdditiveCylinder.svg
|IconR=PartDesign_AdditiveCylinder.svg

Revision as of 05:09, 17 June 2023

PartDesign AdditiveBox

Menu location
Part Design → Create an additive primitive → Additive Box
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
PartDesign CompPrimitiveAdditive, PartDesign SubtractiveBox

Description

Inserts a primitive box in the active Body as the first feature, or fuses it to the existing feature(s).

Usage

  1. Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Options

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DANEAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • DANELabel: Label given to the Box object. Change to suit your needs.
  • DANELength: the Box's dimension in the X-direction.
  • DANEWidth: the Box's dimension in the Y-direction.
  • DANEHeight: the Box's dimension in the Z-direction.