Projekt Części: Linia odniesienia

From FreeCAD Documentation
Revision as of 17:30, 4 June 2023 by Kaktus (talk | contribs) (Created page with "==Użycie==")

Projekt Części: Utwórz linię odniesienia

Lokalizacja w menu
Projekt Części → Utwórz układ odniesienia → Utwórz linię odniesienia
Środowisko pracy
Projekt Części
Domyślny skrót
brak
Wprowadzono w wersji
0.17
Zobacz także
Utwórz punkt odniesienia, Utwórz płaszczyznę odniesienia

Opis

Tworzy linię odniesienia, która może być używana jako odniesienie dla szkiców, innej geometrii odniesienia lub elementów. Na przykład może być używana jako oś obrotu dla funkcji obrotu i rowka.

Dwie linie odniesienia przechodzące przez przeciwległe narożniki sześcianu spotykają się w środku masy.

Użycie

  1. Press the Create a datum line button.
  2. Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Options

Double-click the DatumLine label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Part EditAttachment.

Properties

  • DANEMapMode: lists the attachment mode used.
  • DANEAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DANELabel: name given to the object, this name can be changed at convenience.