Projekt Części: Addytywny stożek

From FreeCAD Documentation
Revision as of 07:00, 17 June 2023 by Kaktus (talk | contribs) (Created page with "Wstawia pierwotny stośek do aktywnej Zawartości jako pierwszy element lub łączy ją z istniejącymi elementami.")

PartDesign AdditiveCone

Menu location
Projekt Części → Utwórz cechę przez dodanie → Addytywny stożek
Workbenches
Projekt Części
Default shortcut
None
Introduced in version
0.17
See also
Komponent bryła pierwotna do dodania, Subtraktywny stożek

Opis

Wstawia pierwotny stośek do aktywnej Zawartości jako pierwszy element lub łączy ją z istniejącymi elementami.

Usage

  1. Press the Additive Cone button. Note: the Additive Cone is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get to the Cone button, click on the down arrow besides the visible icon and select Additive Cone in the menu.
  2. Set the Primitive parameters (for a complete cone, set one of the radii to zero) and the Attachment.
  3. Click OK.
  4. A Cone feature appears under the active Body.

Options

The Cone can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DANEAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • DANELabel: label given to the Cone object. Change to suit your needs.
  • DANERadius1: the radius value at the cone's base.
  • DANERadius2: the radius value at the cone's top. A non-zero value creates a truncated cone.
  • DANEHeight: the height of the cone along its axis.
  • DANEAngle: angle of rotation of the cross section (360 degrees in a full cone).