Część: Elipsa
Part Ellipse |
Menu location |
---|
Part → Create primitives → Ellipse |
Workbenches |
Part, OpenSCAD |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part Primitives |
Description
A Part Ellipse is a parametric shape that can be created with the Part Primitives command. In the coordinate system defined by its DANEPlacement property, the ellipse lies on the XY plane with its center at the origin. Its mayor axis is parallel to the X axis.
A Part Ellipse is in fact a closed counterclockwise elliptical arc, it can be turned into an arc by changing its DANEAngle1 and/or DANEAngle2 properties.
Usage
See Part Primitives.
Example
A Part Ellipse object created with the scripting example below is shown here.
Properties
See also: Property editor.
A Part Ellipse object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Attachment
The object has the same attachment properties as a Part Part2DObject.
Base
- DANEMajorRadius (
Length
): The major radius of the ellipse or elliptical arc. The default is4mm
. - DANEMinorRadius (
Length
): The minor radius of the ellipse or elliptical arc. The default is2mm
. - DANEAngle1 (
Angle
): The start angle of the elliptical arc. Valid range:0° < value <= 360°
. The default is0°
. - DANEAngle2 (
Angle
): The end angle of the elliptical arc. Valid range:0° < value <= 360°
. The default is360°
. If DANEAngle1 and DANEAngle2 are equal, or if one angle is0°
and the other360°
, a full ellipse is created.
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Ellipse can be created with the addObject()
method of the document:
ellipse = FreeCAD.ActiveDocument.addObject("Part::Ellipse", "myEllipse")
- Where
"myEllipse"
is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
ellipse = doc.addObject("Part::Ellipse", "myEllipse")
ellipse.MajorRadius = 20
ellipse.MinorRadius = 10
ellipse.Angle1 = 45
ellipse.Angle2 = 135
ellipse.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(30, 45, 10))
doc.recompute()
- Bryły pierwotne: Prostopadłościan, Walec, Sfera, Stożek, Torus, Rura, Bryły pierwotne, Konstruktor kształtu
- Tworzenie i modyfikacja: Wyciągnij, Wyciągnij przez obrót, Odbicie lustrzane, Skaluj, Zaokrąglenie, Fazka, Utwórz ścianę z linii łamanych, Powierzchnia prostokreślna, Wyciągnięcie przez profile, Wyciągnięcie po ścieżce, Przecięcie, Przekrój poprzeczny, Odsunięcie 3D, Odsunięcie 2D, Grubość, Rzutowanie na powierzchnię, Mocowanie
- Funkcje logiczne: Utwórz złożenie, Rozbij złożenie, Filtr złożeń, Funkcje logiczne, Wytnij, Połączenie, Część wspólna, Przyłącz, Dołącz do osadzenia, Wycięcie połączenia, Funkcja logiczna rozdzielająca, Pokrój część, Krojenie, XOR
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework