Rysunek Roboczy: Prostokąt
Draft: Prostokąt |
Lokalizacja w menu |
---|
Drafting → Prostokąt |
Środowisko pracy |
Rysunek roboczy, Architektura |
Domyślny skrót |
R E |
Wprowadzono w wersji |
0.7 |
Zobacz także |
brak |
Opis
The Draft Rectangle command creates a rectangle in the current working plane from two points.
The corners of a Draft Rectangle can be filleted (rounded) or chamfered by changing its DANEFillet Radius or DANEChamfer Size respectively. It is also possible to subdivide a Draft Rectangle by changing its DANEColumns and/or DANERows property.
Prostokąt zdefiniowany przez dwa punkty
Użycie
Zobacz również Tacka narzędziowa, Przyciąganie oraz Wiązania.
- There are several ways to invoke the command:
- Press the Draft Rectangle button.
- Select the Drafting → Rectangle option from the menu.
- Use the keyboard shortcut: R then E.
- The Rectangle task panel opens. See Options for more information.
- Pick the first point in the 3D view, or type coordinates and press the Enter point button.
- Pick the second point in the 3D view, or type coordinates and press the Enter point button. This point must not be constrained to the X, Y or Z axis.
Opcje
Skróty klawiaturowe jedno znakowe dostępne w panelu zadań można zmienić. Zobacz stronę Preferencji. Skróty wymienione tutaj są skrótami domyślnymi.
- To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
- Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first point, else they are relative to the coordinate system origin.
- Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
- Press L or click the Filled checkbox to toggle filled mode. If filled mode is on, the created rectangle will have DANEMake Face set to
true
and will have a filled face. - Press T or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating rectangles.
- Press S to switch Draft snapping on or off.
- Press Esc or the Close button to abort the command.
Uwagi
- A Draft Rectangle can be edited with the Draft Edit command.
Ustawienia
See also: Preferences Editor and Draft Preferences.
- To change the number of decimals used for the input of coordinates: Edit → Preferences... → General → Units → Units settings → Number of decimals.
- To change the initial value of filled mode: Edit → Preferences... → Draft → General settings → Draft tools options → Fill objects with faces whenever possible. Changing the filled mode in a task panel will override this preference for the current FreeCAD session.
- If the Edit → Preferences... → Draft → General settings → Draft tools options → Use Part Primitives when available option is checked, the command will create a Part Plane instead of a Draft Rectangle.
Właściwości
Zobacz również stronę: Edytor właściwości.
A Draft Rectangle object is derived from a Part Part2DObject and inherits all its properties. It also has the following additional properties:
Dane
Rysunek Roboczy
- DANEArea (
Area
): (read-only) specifies the area of the face of the rectangle. The value will be0.0
if DANEMake Face iffalse
. - DANEChamfer Size (
Length
): specifies the length of the chamfers at the corners of the rectangle. - DANEColumns (
Integer
): specifies the number of equal-sized columns in which the rectangle is divided. - DANEFillet Radius (
Length
): specifies the radius of the fillets at the corners of the rectangle. - DANEHeight (
Distance
): specifies the height of the rectangle. - DANELength (
Distance
): specifies the length of the rectangle. - DANEMake Face (
Bool
): specifies if the rectangle makes a face or not. If it istrue
a face is created, otherwise only the perimeter is considered part of the object. - DANERows (
Integer
): specifies the number of equal-sized rows in which the rectangle is divided.
Widok
Rysunek Roboczy
- WIDOKPattern (
Enumeration
): specifies the Draft Pattern with which to fill the face of the rectangle. This property only works if DANEMake Face istrue
and if WIDOKDisplay Mode isFlat Lines
. - WIDOKPattern Size (
Float
): specifies the size of the Draft Pattern. - WIDOKTexture Image (
File
): specifies the path of the image file to be mapped onto the face of the rectangle. Blanking this property will remove the image. The rectangle should have the same proportions as the image to avoid distortions.
Scripting
See also: Autogenerated API documentation and FreeCAD Scripting Basics.
To create a Draft Rectangle use the make_rectangle
method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeRectangle
method.
rectangle = make_rectangle(length, height, placement=None, face=None, support=None)
- Creates a
rectangle
object withlength
in the X direction andheight
in the Y direction, with units in millimeters. - If
placement
isNone
the rectangle is created at the origin and the length will be parallel to the X axis. - If
face
isTrue
, the rectangle will make a face, that is, it will appear filled.
Example:
import FreeCAD as App
import Draft
doc = App.newDocument()
rectangle1 = Draft.make_rectangle(4000, 1000)
rectangle2 = Draft.make_rectangle(1000, 4000)
zaxis = App.Vector(0, 0, 1)
p3 = App.Vector(1000, 1000, 0)
place3 = App.Placement(p3, App.Rotation(zaxis, 45))
rectangle3 = Draft.make_rectangle(3500, 250, placement=place3)
doc.recompute()
- Kreślenie: Linia, Polilinia, Zaokrąglenie, Łuk, Łuk przez 3 punkty, Okrąg, Elipsa, Wielokąt foremny, Krzywa złożona, Krzywa Bezier'a, Punkt, Łącznik ścian, Kształt z tekstu, Kreskowanie, Prostokąt
- Adnotacje: Adnotacja wieloliniowa, Wymiarowanie, Etykieta, Edytor stylów adnotacji, Widżet skali anotacji
- Modyfikacja: Przesuń, Obróć, Skala, Odbicie lustrzane, Odsunięcie, Przytnij, Rozciągnij, Klonuj, Szyk, Szyk biegunowy, Szyk kołowy, Szyk po ścieżce, Szyk powiązań po ścieżce, Szyk z punktów, Szyk powiązań w punktach, Edycja, Podświetl element podrzędny, Połącz, Rozdziel, Ulepsz kształt, Rozbij obiekt na elementy, Polilinia na krzywą złożoną, Rysunek Roboczy do szkicu, Nachylenie, Obróć wymiar, Widok 2D kształtu
- Tacka narzędziowa: Wybór płaszczyzny, Ustaw styl, Przełącz tryb konstrukcyjny, Grupowanie automatyczne
- Przyciąganie: Przełącz przyciąganie, Przyciągnij do punktu końcowego, Przyciągnij do punktu środkowego, Przyciągnij do środka, Przyciągnij do kąta, Przyciąganie do punktu przecięcia, Przyciągnij prostopadle, Rozszerz, Przyciągnij równolegle, Przyciągnij specjalnie, Przyciąganie do najbliższego, Przyciągnij ortogonalnie, Przyciągnij do siatki, Przyciągnij do płaszczyzny roboczej, Przyciągnij do wymiaru, Pokaż / ukryj siatkę
- Różności: Zastosuj bieżący styl, Warstwa, Zarządzaj warstwami, Dodaj grupę o nazwie, Dodaj do grupy, Wybierz grupę, Dodaj do grupy konstrukcyjnej, Przełącz tryb wyświetlania, Pośrednia płaszczyzna robocza, Ulecz, Przełącz tryb kontynuacji, Pokaż przybornik przyciągania
- Dodatkowe:: Wiązania, Wypełnienie wzorem, Preferencje, Ustawienia Importu i Eksportu, DXF/DWG, SVG, OCA, DAT
- Menu podręczne:
- Kontener warstwy: Połącz duplikaty warstw, Dodaj warstwę
- Warstwa: Aktywuj warstwę, Zaznacz zawartość warstwy
- Pośrednia płaszczyzna robocza: Zapisz ujęcie widoku, Zapisz stan obiektów
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework