Rysunek Roboczy: Przełącz tryb kontynuacji

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Draft ToggleContinueMode and the translation is 12% complete.

Draft ToggleContinueMode.svg Draft ToggleContinueMode

Menu location
Utilities → Toggle continue mode
Draft, Arch
Default shortcut
Introduced in version
See also


The Draft ToggleContinueMode.svg Draft ToggleContinueMode command switches continue mode on or off. Many Draft and Arch commands support this mode. If continue mode is on they will restart after finishing. Continue mode can also be toggled in the task panel of those commands so in practice this command is rarely used.


  1. Select the Utilities → Draft ToggleContinueMode.svg Toggle continue mode option from the menu.
  2. Invoke a command that supports continue mode, Draft Line or Arch Wall for example.
  3. To toggle continue mode in the task panel of the command: press T or click the Continue checkbox.
  4. Create your geometry.
  5. Press Esc or the Close button to finish the command and switch off continue mode.