Rysunek Roboczy: Wielokąt foremny
|
Menu location |
---|
Drafting → Polygon |
Workbenches |
Draft, Arch |
Default shortcut |
P G |
Introduced in version |
0.7 |
See also |
None |
Description
The Draft Polygon command creates a regular polygon in the current working plane from a center and a radius. The radius can be defined by picking a point.
A Draft Polygon can be switched from inscribed to circumscribed by changing its DANEDraw Mode property. The corners of a Draft Polygon can be filleted (rounded) or chamfered by changing its DANEFillet Radius or DANEChamfer Size respectively.
Regular polygon defined by two points, center and radius
Usage
See also: Draft Tray, Draft Snap and Draft Constrain.
- There are several ways to invoke the command:
- Press the
Draft Polygon button.
- Select the Drafting →
Polygon option from the menu.
- Use the keyboard shortcut: P then G.
- Press the
- The Polygon task panel opens. See Options for more information.
- Adjust the desired number of Sides.
- Pick the first point, the center of the polygon, in the 3D view, or type coordinates and press the
Enter point button.
- Pick the second point in the 3D view, or enter a Radius.
Options
The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts.
- To manually enter the coordinates for the center enter the X, Y and Z component, and press Enter after each. Or you can press the
Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
- Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
- Press L or click the Filled checkbox to toggle filled mode. If filled mode is on, the created polygon will have DANEMake Face set to
true
and will have a filled face. - Press T or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating polygons.
- Press S to switch Draft snapping on or off.
- Press Esc or the Close button to abort the command.
Notes
- A Draft Polygon can be edited with the Draft Edit command.
Preferences
See also: Preferences Editor and Draft Preferences.
- To change the number of decimals used for the input of coordinates and radii: Edit → Preferences... → General → Units → Units settings → Number of decimals.
- To change the initial value of filled mode: Edit → Preferences... → Draft → General settings → Draft tools options → Fill objects with faces whenever possible. Changing the filled mode in a task panel will override this preference for the current FreeCAD session.
- If the Edit → Preferences... → Draft → General settings → Draft tools options → Use Part Primitives when available option is checked, the command will create a Part RegularPolygon instead of a Draft Polygon.
Properties
See also: Property editor.
A Draft Polygon object is derived from a Part Part2DObject and inherits all its properties. It also has the following additional properties:
Data
Draft
- DANEArea (
Area
): (read-only) specifies the area of the face of the polygon. The value will be0.0
if DANEMake Face iffalse
. - DANEChamfer Size (
Length
): specifies the length of the chamfers at the corners of the polygon. - DANEDraw Mode (
Enumeration
): specifies if the polygon isinscribed
in a circle orcircumscribed
around a circle. - DANEFaces Number (
Integer
): specifies the number of sides of the polygon. - DANEFillet Radius (
Length
): specifies the radius of the fillets at the corners of the polygon. - DANEMake Face (
Bool
): specifies if the polygon makes a face or not. If it istrue
a face is created, otherwise only the perimeter is considered part of the object. - DANERadius (
Length
): specifies the radius of the circle that defines the polygon.
View
Draft
- WIDOKPattern (
Enumeration
): specifies the Draft Pattern with which to fill the face of the polygon. This property only works if DANEMake Face istrue
and if WIDOKDisplay Mode isFlat Lines
. - WIDOKPattern Size (
Float
): specifies the size of the Draft Pattern.
Scripting
See also: Autogenerated API documentation and FreeCAD Scripting Basics.
To create a Draft Polygon use the make_polygon
method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makePolygon
method.
polygon = make_polygon(nfaces, radius=1, inscribed=True, placement=None, face=None, support=None)
- Creates a
polygon
object with the given number of faces (nfaces
), and based on a circle ofradius
in millimeters. - If
inscribed
isTrue
, the polygon is inscribed in the circle, otherwise it will be circumscribed. - If
placement
isNone
the polygon is created at the origin and one of its vertices will lie on the X axis. - If
face
isTrue
, the polygon will make a face, that is, it will appear filled.
Example:
import FreeCAD as App
import Draft
doc = App.newDocument()
polygon1 = Draft.make_polygon(4, radius=500)
polygon2 = Draft.make_polygon(5, radius=750)
zaxis = App.Vector(0, 0, 1)
p3 = App.Vector(1000, 1000, 0)
place3 = App.Placement(p3, App.Rotation(zaxis, 90))
Polygon3 = Draft.make_polygon(6, radius=1450, placement=place3)
doc.recompute()
- Kreślenie: Linia, Polilinia, Zaokrąglenie, Łuk, Łuk przez 3 punkty, Okrąg, Elipsa, Wielokąt foremny, Krzywa złożona, Krzywa Bezier'a, Punkt, Łącznik ścian, Kształt z tekstu, Kreskowanie, Prostokąt
- Adnotacje: Adnotacja wieloliniowa, Wymiarowanie, Etykieta, Edytor stylów adnotacji, Widżet skali anotacji
- Modyfikacja: Przesuń, Obróć, Skala, Odbicie lustrzane, Odsunięcie, Przytnij, Rozciągnij, Klonuj, Szyk, Szyk biegunowy, Szyk kołowy, Szyk po ścieżce, Szyk powiązań po ścieżce, Szyk z punktów, Szyk powiązań w punktach, Edycja, Podświetl element podrzędny, Połącz, Rozdziel, Ulepsz kształt, Rozbij obiekt na elementy, Polilinia na krzywą złożoną, Rysunek Roboczy do szkicu, Nachylenie, Obróć wymiar, Widok 2D kształtu
- Tacka narzędziowa: Wybór płaszczyzny, Ustaw styl, Przełącz tryb konstrukcyjny, Grupowanie automatyczne
- Przyciąganie: Przełącz przyciąganie, Przyciągnij do punktu końcowego, Przyciągnij do punktu środkowego, Przyciągnij do środka, Przyciągnij do kąta, Przyciąganie do punktu przecięcia, Przyciągnij prostopadle, Rozszerz, Przyciągnij równolegle, Przyciągnij specjalnie, Przyciąganie do najbliższego, Przyciągnij ortogonalnie, Przyciągnij do siatki, Przyciągnij do płaszczyzny roboczej, Przyciągnij do wymiaru, Pokaż / ukryj siatkę
- Różności: Warstwa, Dodaj grupę o nazwie, Dodaj do grupy, Wybierz grupę, Dodaj do grupy konstrukcyjnej, Przełącz tryb wyświetlania, Pośrednia płaszczyzna robocza, Zastosuj bieżący styl, Ulecz, Przełącz tryb kontynuacji, Pokaż przybornik przyciągania
- Dodatkowe:: Wiązania, Wypełnienie wzorem, Preferencje, Ustawienia Importu i Eksportu, DXF/DWG, SVG, OCA, DAT
- Menu podręczne:
- Kontener warstwy: Połącz duplikaty warstw, Dodaj warstwę
- Warstwa: Aktywuj warstwę, Zaznacz zawartość warstwy
- Pośrednia płaszczyzna robocza: Zapisz ujęcie widoku, Zapisz stan obiektów

- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Path, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web