# Draft Rectangle/ru

This page is a translated version of the page Draft Rectangle and the translation is 0% complete.
Outdated translations are marked like this.
Other languages:
Системное название Draft Rectangle Draft Rectangle Черчение -> Прямоугольник Draft, Arch R E - Куб

## Description

The Draft Rectangle command creates a rectangle on the current working plane from two points.

The corners of a Draft Rectangle can be filleted (rounded) or chamfered by changing its ДанныеFillet Radius or ДанныеChamfer Size respectively. It is also possible to subdivide a Draft Rectangle by changing its ДанныеColumns and/or ДанныеRows property.

Rectangle defined by two points

## Usage

See also: Draft Tray, Draft Snap and Draft Constrain.

1. There are several ways to invoke the command:
• Press the button.
• Select the Drafting → Rectangle option from the menu.
• Use the keyboard shortcut: R then E.
2. The Rectangle task panel opens. See Options for more information.
3. Pick the first point in the 3D view, or type coordinates and press the Enter point button.
4. Pick the second point in the 3D view, or type coordinates and press the Enter point button. This point must not be constrained to the X, Y or Z axis.

## Options

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).

• To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
• Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first point, else they are relative to the coordinate system origin.
• Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
• Press F or click the Filled checkbox to toggle filled mode. If filled mode is on, the created rectangle will have ДанныеMake Face set to `true` and will have a filled face.
• Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating rectangles.
• Press S to switch Draft snapping on or off.
• Press Esc or the Close button to abort the command.

## Notes

• A Draft Rectangle can be edited with the Draft Edit command.

## Preferences

See also: Preferences Editor and Draft Preferences.

• If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a Part Plane instead of a Draft Rectangle.

## Properties

A Draft Rectangle object is derived from a Part Part2DObject and inherits all its properties. It also has the following additional properties:

### Data

Draft

• ДанныеArea (`Area`): (read-only) specifies the area of the face of the rectangle. The value will be `0.0` if ДанныеMake Face if `false`.
• ДанныеChamfer Size (`Length`): specifies the length of the chamfers at the corners of the rectangle.
• ДанныеColumns (`Integer`): specifies the number of equal-sized columns in which the rectangle is divided.
• ДанныеFillet Radius (`Length`): specifies the radius of the fillets at the corners of the rectangle.
• ДанныеHeight (`Distance`): specifies the height of the rectangle.
• ДанныеLength (`Distance`): specifies the length of the rectangle.
• ДанныеMake Face (`Bool`): specifies if the rectangle makes a face or not. If it is `true` a face is created, otherwise only the perimeter is considered part of the object.
• ДанныеRows (`Integer`): specifies the number of equal-sized rows in which the rectangle is divided.

### View

Draft

• ВидPattern (`Enumeration`): specifies the Draft Pattern with which to fill the face of the rectangle. This property only works if ДанныеMake Face is `true` and if ВидDisplay Mode is `Flat Lines`.
• ВидPattern Size (`Float`): specifies the size of the Draft Pattern.
• ВидTexture Image (`File`): specifies the path of the image file to be mapped onto the face of the rectangle. Blanking this property will remove the image. The rectangle should have the same proportions as the image to avoid distortions.

## Scripting

To create a Draft Rectangle use the `make_rectangle` method (introduced in version 0.19) of the Draft module. This method replaces the deprecated `makeRectangle` method.

```rectangle = make_rectangle(length, height, placement=None, face=None, support=None)
```
• Creates a `rectangle` object with `length` in the X direction and `height` in the Y direction, with units in millimeters.
• If `placement` is `None` the rectangle is created at the origin and the length will be parallel to the X axis.
• If `face` is `True`, the rectangle will make a face, that is, it will appear filled.

Example:

```import FreeCAD as App
import Draft

doc = App.newDocument()

rectangle1 = Draft.make_rectangle(4000, 1000)
rectangle2 = Draft.make_rectangle(1000, 4000)

zaxis = App.Vector(0, 0, 1)
p3 = App.Vector(1000, 1000, 0)
place3 = App.Placement(p3, App.Rotation(zaxis, 45))

rectangle3 = Draft.make_rectangle(3500, 250, placement=place3)

doc.recompute()
```