Rysunek Roboczy: Ustaw nachylenie

From FreeCAD Documentation
Revision as of 11:53, 18 December 2023 by Kaktus (talk | contribs) (Created page with "==Użycie==")

Rysunek Roboczy: Ustaw nachylenie

Lokalizacja w menu
Modyfikacja → Ustaw nachylenie
Środowisko pracy
Rysunek Roboczy, Architektura
Domyślny skrót
brak
Wprowadzono w wersji
0.17
Zobacz także
brak

Opis

Narzędzie Utwórz nachylenie pochyla wybraną linię lub polilinię poprzez zwiększenie lub zmniejszenie współrzędnej Z każdego punktu znajdującego się za punktem pierwszym. Narzędzie to może być również użyte do spłaszczenia polilinii. Należy pamiętać, że nachylenie odnosi się do płaszczyzny XY zdefiniowanej przez właściwość DANEUmiejscowienie obiektów.

Po lewej, pozioma linia. Po prawej, ta sama linia o wartości nachylenia 1 (kąt 45°).

Użycie

  1. Select one or more Draft Lines and/or Draft Wires.
  2. There are several ways to invoke the command:
    • Press the Set slope button.
    • Select the Modification → Set slope option from the menu.
  3. Enter a Slope value. 0 means each segment is horizontal, 0.5 means the delta height for each segment is 0.5 times its length, etc. The value can also be negative.
  4. Press Enter or the OK button to finish the command.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

There is no Python method to slope objects. To emulate the results of the Draft Slope command the Points property of wire objects has to be modified.