FEM ConstraintFixed: Difference between revisions

From FreeCAD Documentation
(Let's add a CalculiX link here as well.)
(Marked this version for translation)
 
Line 37: Line 37:
You cannot mix object types within the same boundary condition. Use a separate fixed boundary condition for each object type.
You cannot mix object types within the same boundary condition. Use a separate fixed boundary condition for each object type.


==Notes==
==Notes== <!--T:13-->


<!--T:14-->
* This feature uses the [https://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node163.html *BOUNDARY card in CalculiX].
* This feature uses the [https://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node163.html *BOUNDARY card in CalculiX].



Latest revision as of 09:05, 27 January 2024

FEM ConstraintFixed

Menu location
Model → Mechanical boundary conditions and loads → Fixed boundary condition
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM Constraint contact

Description

Creates a FEM boundary condition for a fixed geometrical entity by locking all the available degrees of freedom of the nodes underlying the selected geometrical entity (6 DOFs for beam and shell elements, 3 for solid elements).

Usage

  1. There are several ways to invoke the command:
    • Press the Fixed boundary condition button.
    • Select the Model → Mechanical boundary conditions and loads → Fixed boundary condition option from the menu.
  2. In the 3D view select the object the boundary condition should be applied to, which can be a vertex (corner), edge, or face.

Limitations

You cannot mix object types within the same boundary condition. Use a separate fixed boundary condition for each object type.

Notes