FEM ConstraintInitialFlowVelocity: Difference between revisions

From FreeCAD Documentation
(Changed 1st sentence of 'Usage'.)
(Usage again...)
Line 28: Line 28:


<!--T:9-->
<!--T:9-->
# There are several ways to invoke the command:
# Press the {{Button|[[Image:FEM_ConstraintInitialFlowVelocity.svg|16px]]}} button or choose {{MenuCommand|Model → Fluid Constraints → [[Image:FEM_ConstraintInitialFlowVelocity.svg|16px]] Constraint initial flow velocity‏‎}} from the top menu.
#* Press the {{Button|[[Image:FEM_ConstraintInitialFlowVelocity.svg|16px]] [[FEM_ConstraintInitialFlowVelocity|FEM ConstraintInitialFlowVelocity]]}} button.
# Enter an initial flow velocity value for the analysis. The value is entered as a combination of the 3 main cartesian vectors components (X,Y,Z).
#* Select the {{MenuCommand|Model → Fluid Constraints → [[Image:FEM_ConstraintInitialFlowVelocity.svg|16px]] Constraint initial flow velocity}} option from the menu.
# Enter an initial flow velocity value for the analysis.
# The value is entered as a combination of the 3 main cartesian vectors components (X,Y,Z).


==Limitations== <!--T:11-->
==Limitations== <!--T:11-->

Revision as of 13:34, 25 February 2021

FEM ConstraintInitialFlowVelocity

Menu location
Model → Fluid Constraints → Constraint initial flow velocity
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
Constraint flow velocity

Description

Creates an initial flow velocity constraint for a fluid flow analysis.

Usage

  1. There are several ways to invoke the command:
  2. Enter an initial flow velocity value for the analysis.
  3. The value is entered as a combination of the 3 main cartesian vectors components (X,Y,Z).

Limitations

  • The constraint applies the initial flow velocity to all nodes in the FEA model.
  • The constraint cannot be oriented other then using the main cartesian components.

Notes

In the most simple analyses, it is not necessary to specify the initial flow velocity, however it is recommended as best practice.