FEM ConstraintFixed: Difference between revisions

From FreeCAD Documentation
mNo edit summary
(added a note)
Line 37: Line 37:
You cannot mix object types within the same boundary condition. Use a separate fixed boundary condition for each object type.
You cannot mix object types within the same boundary condition. Use a separate fixed boundary condition for each object type.


==Notes==
* This feature uses the *BOUNDARY card in CalculiX.


<!--T:10-->
<!--T:10-->

Revision as of 15:21, 26 January 2024

FEM ConstraintFixed

Menu location
Model → Mechanical boundary conditions and loads → Fixed boundary condition
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM Constraint contact

Description

Creates a FEM boundary condition for a fixed geometrical entity by locking all the available degrees of freedom of the nodes underlying the selected geometrical entity (6 DOFs for beam and shell elements, 3 for solid elements).

Usage

  1. There are several ways to invoke the command:
    • Press the Fixed boundary condition button.
    • Select the Model → Mechanical boundary conditions and loads → Fixed boundary condition option from the menu.
  2. In the 3D view select the object the boundary condition should be applied to, which can be a vertex (corner), edge, or face.

Limitations

You cannot mix object types within the same boundary condition. Use a separate fixed boundary condition for each object type.

Notes

  • This feature uses the *BOUNDARY card in CalculiX.