Rysunek Roboczy: Przełącz tryb kontynuacji

From FreeCAD Documentation
Revision as of 12:47, 30 December 2023 by Kaktus (talk | contribs) (Created page with "==Opis==")
TO POLECENIE JEST PRZESTARZAŁE
Nie będzie dostępne w wersja 0.22 i powyżej. Zamiast tego należy użyć pola wyboru Kontynuuj w panelu zadań poleceń obsługujących ten tryb.

Rysunek Roboczy: Przełącz tryb kontynuacji

Lokalizacja w menu
Narzędzia → Przełącz tryb kontynuacji
Środowisko pracy
Rysunek Roboczy, Architektura
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
brak

Opis

The Draft ToggleContinueMode command switches continue mode on or off. Many Draft and Arch commands support this mode. If continue mode is on they will restart after finishing. Continue mode can also be toggled in the task panel of those commands so in practice this command is rarely used.

Usage

  1. Select the Utilities → Toggle continue mode option from the menu.
  2. Invoke a command that supports continue mode, Draft Line or Arch Wall for example.
  3. To toggle continue mode in the task panel of the command: press T or click the Continue checkbox.
  4. Create your geometry.
  5. Press Esc or the Close button to finish the command and switch off continue mode.