Draft Snap Special/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Obsługiwane punkty specjalne==")
(Created page with "Polecenie 24px '''Draft Snap Special''' przyciąga do punktów specjalnych zdefiniowanych przez obiekt. Obsługiwane obiekty to Architektura: Ściana, Architektura: Konstrukcja i Architektura: Wyposażenie.")
Line 21: Line 21:
==Opis==
==Opis==


The [[Image:Draft_Snap_Special.svg|24px]] '''Draft Snap Special''' option snaps to [[#Supported_special_points|special points]] defined by the object. The supported objects are [[Arch_Wall|Arch Walls]], [[Arch_Structure|Arch Structures]] and [[Arch_Equipment|Arch Equipment]].
Polecenie [[Image:Draft_Snap_Special.svg|24px]] '''Draft Snap Special''' przyciąga do [[#Obsługiwane_punkty_specjalne|punktów specjalnych]] zdefiniowanych przez obiekt. Obsługiwane obiekty to [[Arch_Wall/pl|Architektura: Ściana]], [[Arch_Structure/pl|Architektura: Konstrukcja]] i [[Arch_Equipment/pl|Architektura: Wyposażenie]].


[[Image:Draft_Snap_Special_example.png]]
[[Image:Draft_Snap_Special_example.png]]

Revision as of 18:49, 27 December 2023

Rysunek Roboczy: Przyciągnij specjalnie

Lokalizacja w menu
brak
Środowisko pracy
Rysunek Roboczy, Architektura
Domyślny skrót
brak
Wprowadzono w wersji
0.17
Zobacz także
Przyciąganie, Przełącz przyciąganie

Opis

Polecenie Draft Snap Special przyciąga do punktów specjalnych zdefiniowanych przez obiekt. Obsługiwane obiekty to Architektura: Ściana, Architektura: Konstrukcja i Architektura: Wyposażenie.

Snapping the second point of a line to a special point of an Arch Wall, which is a vertex of its Base object

Usage

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Special is not active do one of the following:
    • Press the button in the Draft snap toolbar.
    • Hold down the button in the Draft snap widget and in the menu that opens select the Snap Special option.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the cursor over a supported object.
  6. The object is highlighted.
  7. If a special point is found the point is marked and the icon is displayed near the cursor.
  8. If the object has multiple special points: optionally move the cursor closer to another special point.
  9. Click to confirm the point.

Obsługiwane punkty specjalne

Ustawienia

Zobacz stronę Przyciąganie aby uzyskać więcej informacji.