FEM ConstraintBodyHeatSource: Difference between revisions

From FreeCAD Documentation
mNo edit summary
mNo edit summary
 
Line 32: Line 32:
# Set the value:
# Set the value:
#* {{VersionPlus|0.21}}: For a 3D analysis, select a 'solid' (body) from your model, for a 2D analysis select a face.
#* {{VersionPlus|0.21}}: For a 3D analysis, select a 'solid' (body) from your model, for a 2D analysis select a face.
#* {{VersionMinus|0.20}}: Since the constraint has no task dialog, use the [[Property_editor|property editor]] and set the property {{PropertyData|Heat Source}}.
#* {{VersionMinus|0.20}}: Since the tool has no task dialog, use the [[Property_editor|property editor]] and set the property {{PropertyData|Heat Source}}.


==Limitation== <!--T:12-->
==Limitation== <!--T:12-->

Latest revision as of 23:01, 13 November 2023

FEM ConstraintBodyHeatSource

Menu location
Model → Thermal boundary conditions and loads → Body heat source
Workbenches
FEM
Default shortcut
None
Introduced in version
0.19
See also
FEM tutorial

Description

Defines an internally generated body heat given in W/kg.

Usage

  1. Press the Body heat source button or select the menu Model → Thermal boundary conditions and loads → Body heat source.
  2. Set the value:
    • version 0.21 and above: For a 3D analysis, select a 'solid' (body) from your model, for a 2D analysis select a face.
    • version 0.20 and below: Since the tool has no task dialog, use the property editor and set the property DataHeat Source.

Limitation

version 0.20 and below: The body heat source is applied to the whole model, meaning all bodies of the setup. It is not possible to select an individual body.

Notes