Draft ToggleGrid/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Ogólne informacje na temat przyciągania można znaleźć na stronie Przyciąganie.")
(Created page with "Polecenie 24px '''Przełącz widoczność siatki'''' włącza lub wyłącza siatkę. Siatka może być używana tylko wtedy, gdy preferencja {{M...")
Line 20: Line 20:
==Opis==
==Opis==


The [[Image:Draft_ToggleGrid.svg|24px]] '''Draft ToggleGrid''' command switches the grid on or off. The grid can only be used if the {{MenuCommand|Use grid}} preference is selected. See [[#Preferences|Preferences]].
Polecenie [[Image:Draft_ToggleGrid.svg|24px]] '''Przełącz widoczność siatki'''' włącza lub wyłącza siatkę. Siatka może być używana tylko wtedy, gdy preferencja {{MenuCommand|Użyj siatki}} jest wybrana. Zobacz akapit [[Draft_ToggleGrid/pl#Ustawienia|Ustawienia]].


In FreeCAD version 0.19 and 0.20 the grid is always displayed when a command becomes active and toggling the grid while a command is active does not work.
In FreeCAD version 0.19 and 0.20 the grid is always displayed when a command becomes active and toggling the grid while a command is active does not work.

Revision as of 04:59, 4 September 2021

Draft ToggleGrid

Menu location
None
Workbenches
Rysunek Roboczy, Architektura
Default shortcut
G R
Introduced in version
-
See also
Przyciąganie, Przyciągnij do siatki, Wybór płaszczyzny roboczej

Opis

Polecenie Przełącz widoczność siatki' włącza lub wyłącza siatkę. Siatka może być używana tylko wtedy, gdy preferencja Użyj siatki jest wybrana. Zobacz akapit Ustawienia.

In FreeCAD version 0.19 and 0.20 the grid is always displayed when a command becomes active and toggling the grid while a command is active does not work.

Użycie

Ogólne informacje na temat przyciągania można znaleźć na stronie Przyciąganie.

  1. Optionally change the working plane and/or the grid.
  2. To invoke Draft ToggleGrid do one of the following:
    • Press the button in the Draft Snap toolbar.
    • Press the button in the Draft snap widget.
    • Use the keyboard shortcut: G then R. This shortcut cannot be used when a command is active.

Ustawienia

Zobacz stronę Przyciąganie.

  • To use the grid select: Edit → Preferences... → Draft → Grid and snapping → Grid → Use grid. After changing this preference you must restart FreeCAD.
  • Several other grid preferences are also available: Edit → Preferences... → Draft → Grid and snapping → Grid.