Draft Snap Near/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opis==")
(Created page with "Metoda ta powoduje przyciąganie do najbliższego punktu lub krawędzi na obiekcie znajdującym się najbliżej.")
Line 18: Line 18:
==Opis==
==Opis==


Metoda ta powoduje przyciąganie do najbliższego punktu lub krawędzi na obiekcie znajdującym się najbliżej.
This method snaps to the closest point or edge on the nearest object.


[[Image:Draft_Snap_Near_example.png|400px]]
[[Image:Draft_Snap_Near_example.png|400px]]

Revision as of 11:35, 4 April 2021

Rysunek roboczy: przyciąganie do najbliższego

Lokalizacja w menu
Draft → Przyciąganie → Do najbliższego
Środowisko pracy
Rysunek roboczy, Architektura
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Przyciąganie, Przełącz przyciąganie

Opis

Metoda ta powoduje przyciąganie do najbliższego punktu lub krawędzi na obiekcie znajdującym się najbliżej.

Snapping the second point of a line to the edge of a rectangle

Usage

  1. Make sure Draft ToggleSnap and Snap Near are turned on.
  2. Choose a Draft tool to draw a shape.
  3. Move the cursor near the object to which you wish to attach your point.
  4. A small yellow circle will indicate where your point will be placed; it can be a vertex or an edge.
  5. Click to attach your new point.

Notes

Other snapping methods will be tried first; if none is available, the cursor will just attach to the nearest point on the target object.