FEM ConstraintBodyHeatSource: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 25: Line 25:
<!--T:2-->
<!--T:2-->
Defines an internally generated body heat given in W/kg.
Defines an internally generated body heat given in W/kg.

{{VersionPlus|1.0}}: Can also define the heat source in W.


==Usage== <!--T:9-->
==Usage== <!--T:9-->

Revision as of 09:20, 12 June 2024

FEM ConstraintBodyHeatSource

Menu location
Model → Thermal boundary conditions and loads → Body heat source
Workbenches
FEM
Default shortcut
None
Introduced in version
0.19
See also
FEM tutorial

Description

Defines an internally generated body heat given in W/kg.

version 1.0 and above: Can also define the heat source in W.

Usage

  1. Press the Body heat source button or select Model → Thermal boundary conditions and loads → Body heat source from the menu.
  2. version 0.21 and above: For a 3D analysis, select a 'solid' (body) from your model, for a 2D analysis select a face.
  3. Set the value:
    • version 0.20 and below: Since the tool has no task dialog, use the property editor and set the property DataHeat Source.
    • introduced in version 0.21: Enter the body heat in W/kg.
    • version 1.0 and above: Select the mode:
      • Dissipation Rate - enter the dissipation rate in W/kg .
      • Total Power - enter the total power in W.

Limitations

  • version 0.20 and below: The body heat source is applied to the whole model, meaning all bodies of the setup. It is not possible to select an individual body.
  • version 0.21 and below: This feature works only with the Elmer solver.

Notes