BIM Library/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opis==")
(Created page with "Narzędzie Biblioteka pozwala na umieszczenie w bieżącym modelu obiektu z FreeCAD Parts Library, który musi być zainstalowany poprzez 24px|link=Std_AddonMgr/pl Menedżera dodatków, aby to narzędzie było dostępne.")
Line 13: Line 13:
==Opis==
==Opis==


The BIM Library tool allows you to place, in the current model, an object from the [[Parts Library|FreeCAD Parts Library]], which must be installed via the [[Image:Std_AddonMgr.svg|24px|link=Std_AddonMgr]] [[Std_AddonMgr|Addon Manager]] for this tool to be available.
Narzędzie Biblioteka pozwala na umieszczenie w bieżącym modelu obiektu z [[Biblioteka części/pl|FreeCAD Parts Library]], który musi być zainstalowany poprzez [[Image:Std_AddonMgr.svg|24px|link=Std_AddonMgr/pl]] [[Std_AddonMgr/pl|Menedżera dodatków]], aby to narzędzie było dostępne.





Revision as of 19:06, 13 January 2024

BIM Library

Położenie w menu
Modelowanie 3D → Biblioteka
Środowisko pracy
BIM
Skrót klawiszowy
Brak
Warto zobaczyć
Wyposażenie
 
To polecenie jest częścią Dodatku BIM, który może być zainstalowany poprzez menu Przybory → Menadżer dodatków

Opis

Narzędzie Biblioteka pozwala na umieszczenie w bieżącym modelu obiektu z FreeCAD Parts Library, który musi być zainstalowany poprzez Menedżera dodatków, aby to narzędzie było dostępne.


Above: See the Library browser dialog in the Task panel on the left

Usage

  1. Press the BIM Library button
    Result: In the Combo viewTask panel a dialog titled Library browser will display
  2. Click a file from the Library browser
  3. Double-click it or press the Insert button
  4. Click a point in the 3D view or enter a coordinate manually to place the object

Options

  • FCStd, STEP and BREP files are supported. Only STEP and BREP files are placeable. FCStd files will not allow you to choose a placement, as they might be composed of a complex series of objects with significant positions. When choosing an FCStd file, its contents will be inserted at the position that is defined in the file.
  • STEP and BREP objects are inserted as Arch Equipment Equipment with no separated base shape. Adding a base shape to these objects afterwards will destroy their current shape.
  • On placing an object, you can choose their insertion point between original (the (0,0,0) point defined in the file), top, middle, bottom and left, center and right.
  • The Library can work offline, in which case it relies on the Parts Library addon to be installed (and updated by the user), or online, in which case it browses directly from the Parts Library Git repository and allows to download directly from there.