Rysunek Techniczny: Wstaw wymiar promienia

From FreeCAD Documentation
Revision as of 07:52, 21 July 2023 by Kaktus (talk | contribs) (Created page with "==Użycie==")

Rysunek Techniczny: Wstaw wymiar promienia

Lokalizacja w menu
Rysunek Techniczny → Wymiary → Wstaw wymiar promienia
Środowisko pracy
Rysunek Techniczny
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Wstaw wymiar średnicy

Opis

Narzędzie Wstaw wymiar promienia dodaje wymiar promienia do widoku. Wymiar może być zastosowany do dowolnej krawędzi na rysunku, która jest okręgiem lub łukiem okręgu. Początkowo będzie to odległość rzutowana (tzn. taka, jak na rysunku), ale można ją zmienić na rzeczywistą odległość 3D za pomocą narzędzia Powiązanie wymiaru.

Pomiar okręgu, wskazanie promienia

Użycie

  1. Select a circle or circular arc in the drawing. (Note some arcs which appear to be circular are actually ellipses or BSplines. You cannot make a radius dimension in these cases)
  2. Press the Radius Dimension button
  3. A dimension will be added to the View. The dimension may be dragged to the desired position.
  4. If needed, add tolerances as described on this page.

To change the properties of a dimension object either double-click it in the drawing or in the Tree view. This will open the dimension dialog.

Limitations

Dimension objects are vulnerable to the "topological naming problem". See TechDraw LengthDimension for more information.

Properties

See TechDraw LengthDimension.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

The Radius Dimension tool can be used in macros and from the Python console by using the following functions:

dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "Radius"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)